APC GVSUPS30KB4HS user manual

Contents

1. Important Safety Instructions — SAVE THESE INSTRUCTIONSp. 5

   UPS Important Safety Instructions — SAVE THESE INSTRUCTIONS Read these instructions carefully and look at the equipment to become familiar with it before…

2. Overview of User Interfacep. 7

   UPS Overview of User Interface Display Overview of the Home Screen A. Home button - tap here on any screen to return to the home screen. B. Main menu button -…

3. Operation Modesp. 12

   The Galaxy UPS has two different levels of operation modes: • UPS mode: The operation mode of the individual UPS. See UPS Modes, page 12. • System mode: The…

4. Configurationp. 16

   Configure the UPS Input NOTE: This configuration is mandatory for correct UPS operation. 1. Tap Configuration > UPS. a. Set the Mains configuration to Single…

5. Operation Proceduresp. 34

   Start Up the UPS System from Off Mode NOTE: Use this procedure to start up a UPS from Off mode with no supplied load. If you are starting up the UPS with load…

6. Testsp. 44

   The UPS system can perform the following tests to ensure correct performance of the system: • Buzzer • Status LEDs • Breaker lamp • Runtime calibration •…

7. Maintenancep. 46

   Replace the Air Filter (GVSOPT001 and GVSOPT015) 1. Open the front panel of the UPS. 2. Remove the air filter by pushing it upwards until you can ease it over…

8. Troubleshootingp. 53

   UPS Troubleshooting Status LED Lighting per UPS Operation Mode If the display becomes inoperable, you can see the UPS operation mode via the status LEDs behind…

Other documents for this model

• APC GVSUPS30KB4HS user manual
• APC GVSUPS15KB4HS user manual