APC GVSUPS15KB4HS user manual

Contents

1. Important Safety Instructions — SAVE THESE INSTRUCTIONSp. 5

   UPS with Up to 2 Internal Battery Strings Important Safety Instructions — SAVE THESE INSTRUCTIONS Read these instructions carefully and look at the equipment…

2. Specificationsp. 11

   UPS with Up to 2 Internal Battery Strings Specifications Input Specifications UPS rating 10 kW 15 kW 20 kW Voltage (V) 200/208/220 380/400/415 380/400/415…

3. Single System Overviewp. 21

   UPS with Up to 2 Internal Battery Strings Single System Overview UIB Unit input breaker SSIB Static switch input breaker IMB Internal maintenance breaker UOB…

4. Parallel System Overviewp. 22

   UIB Unit input breaker SSIB Static switch input breaker IMB Internal maintenance breaker UOB Unit output breaker SIB System isolation breaker BB Battery…

5. Overview of Installation Kitsp. 24

   Installation Kit 0M-88357 Part Used in Number of units USB cable Connect the Modbus Cables, page 39. 1 150 Ohm resistor 10 Terminal connector 2 Optional…

6. Installation Procedurep. 25

   UPS with Up to 2 Internal Battery Strings Installation Procedure Single System Parallel System CAUTION TIP HAZARD Do not remove the transportation brackets…

7. Install the Seismic Anchoring (Option)p. 26

   1. Mount the rear anchor(s) to the floor. Use appropriate hardware for the floor type – the hole diameter in the rear anchor is ø14 mm. 26 990-91260A-001

8. Prepare for Installationp. 27

   UPS with Up to 2 Internal Battery Strings Prepare for Installation DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Do not drill or punch holes for…

9. Connect the Power Cablesp. 31

   UPS with Up to 2 Internal Battery Strings Connect the Power Cables NOTICE RISK OF EQUIPMENT DAMAGE To ensure correct load sharing in bypass operation in a…

10. Connect the Signal Cablesp. 33

    UPS with Up to 2 Internal Battery Strings Connect the Signal Cables NOTE: Route the signal cables separately from the power cables and route the Class 2/SELV…

11. Connect the Signal Cables from Switchgear and Third-Party Auxiliary Productsp. 35
12. Connect the PBUS Cablesp. 37

    UPS with Up to 2 Internal Battery Strings Connect the PBUS Cables 1. Connect the provided PBUS 1 (white) and PBUS 2 (red) cables to the PBUS ports in the UPS…

13. Connect the External Communication Cablesp. 38

    1. Connect the external communication cables to the ports in the UPS controller box. Front View of the Controller Box A. Universal I/O port for built-in…

14. Add Translated Safety Labels to Your Productp. 41

    UPS with Up to 2 Internal Battery Strings Add Translated Safety Labels to Your Product The safety labels on your product are in English and French. Sheets with…

15. Final Installationp. 42

    DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Batteries can present a risk of electric shock and high short-circuit current. The following…

Other documents for this model

• APC GVSUPS30KB4HS user manual