Loading manual…
Loading manual…
Gigabit Smart Switch Introduction Chapter 1 Introduction 1.1
TP-LINK Gigabit Smart Switch, designed for workgroups and departments, provides wire-speed performance and abundant layer 2 management features. It provides a…
Gigabit Smart Switch Installation Chapter 2 Installation 2.1 Package Contents Make sure that the package contains the following items. If any of the listed…
To avoid any device damage and bodily injury caused by improper use, please observe the following rules. • •Safety Precautions • • Keep the power off during…
Desktop Installation To install the device on the desktop, please follow the steps: 1. Set the device on a flat surface strong enough to support the entire…
Gigabit Smart Switch Lightning Protection Chapter 3 Lightning Protection 3.1
In the actual network environment, you may need cable outdoors and indoors, and the requirements for cabling outdoors and indoors are different. A reasonable…
Gigabit Smart Switch Connection Chapter 4 Connection 4.1
Connect a Ethernet port of the switch to the computer by RJ45 cable as the following figure shown. RJ45 Port RJ45 Cable Figure 4-1 Connecting the RJ45 Port 4.2
Connect the SFP port to a SFP module. If an SFP transceiver (purchased separately) is installed in a slot and has a valid link on the port, the associated RJ45…
After completing the installation, please verify the following items: • • There are 5~10cm of clearance around the sides of the device for ventilation and the…
Plug in the negative connector of the provided power cord into the power socket of the device, and the positive connector into a power outlet as the following…
Gigabit Smart Switch Configuration Chapter 5 Configuration 5.1
1. To access the GUI of the switch, open a web browser and type the default management address http://192.168.0.1 in the address field of the browser, then…
You can log on to the switch and access the CLI by Logging on to the switch remotely by a Telnet connection through an Ethernet port. To log on to the switch…
Appendix A Troubleshooting Appendix A Troubleshooting Q1. What could I do if I forgot the username and password of the Switch? Press the Reset button for at…
Appendix B Hardware Specifications Appendix B Hardware Specifications Item Content Standards IEEE 802.3i 10Base-T Ethernet IEEE 802.3u 100Base-TX/100Base-FX…