Loading manual…
Loading manual…
MS510TX and MS510TXPP User Manual
1 1Get Started This manual describes how you can configure and monitor the following NETGEAR switches by using the local browser–based management interface: •…
2 2Configure System Information This chapter covers the following topics: • View and Configure the Switch Management Settings • Use the Device View • Configure…
3 3Configure Switching This chapter covers the following topics: • Configure Port Settings and Flow Control • Configure Link Aggregation Groups • Configure…
4 4Configure Routing This chapter contains the following sections. • IP Routing Overview • Configure IP Settings • Configure VLAN Routing • Manage IPv4 Routes…
5 5Configure Quality of Service In a switch, each physical port consists of one or more queues for transmitting packets on the attached network. Multiple…
6 6Manage Device Security This chapter covers the following topics: • Management Security Settings • Configure Management Access • Configure Port…
7 7Monitor the System This chapter covers the following topics: • Monitor the Switch and the Ports • Configure and View Logs • Configure Port Mirroring • View…
8 8Maintain the Switch and Perform Troubleshooting This chapter covers the following topics: • Reboot the Switch • Reset the Switch to Its Factory Default…
A AConfiguration Examples This appendix covers the following topics: • Virtual Local Area Networks (VLANs) • Access Control Lists (ACLs) • Differentiated…
B BHardware Specifications and Default Settings This appendix covers the following topics: • Hardware Specifications • Switch Default Settings