Loading manual…
Netgear MS510TXPP (MS510TXPP-100EUS) installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 36
- Category
- Network switches
- Models
- MS510TXMS510TXPPMS510TXPP-100EUS
Open PDFOpens the file on objects.icecat.biz.
Contents
- 1. Introductionp. 5
Introduction This hardware installation guide complements the installation guide that came with your switch and applies to the following NETGEAR switch models…
- Overviewp. 6
The switch provides two multispeed gigabit copper ports that support 5G, 2.5G, and 1G; another two multispeed gigabit copper ports that support 2.5G and 1G…
- Featuresp. 7
The switch supports the following key hardware features: • Two 5G Ethernet ports (which also support 2.5G and 1G). • Two 2.5G Ethernet ports (which also…
- Safety instructions and warningsp. 8
Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. To reduce the risk of bodily…
- 2. Hardware Overviewp. 12
Hardware Overview This chapter describes the switch hardware features. The chapter includes the following sections: • Hardware description • Switch hardware…
- Hardware descriptionp. 13
The following sections describe the switch hardware features. Front Panel Model MS510TX provides four 1G ports, two 2.5G ports, two 5G ports, one 10G port, and…
- Switch hardware interfacesp. 18
The following sections describe the hardware interfaces on the switch. RJ-45 Ports for 10/100/1000M and 2.5G/5G/10G BASE-T Ethernet Connectivity All RJ-45…
- 3. Applicationsp. 21
Applications The switch is designed to provide flexibility in configuring multispeed network connections. This chapter shows application examples with 5G…
- Multispeed Backbone Switchingp. 22
You can use the switch as a multispeed backbone switch in a network that serves network components such as high-speed servers, a 2.5G NAS, 2.5G (gaming)…
- 2.5G Network Storage and Redundancyp. 22
You can use the switches to provide 2.5G connections and redundancy between 2.5G ReadyNAS storage platforms and 2.5G or 5G connections to virtual machines or…
- Multispeed PoE+ Access Pointsp. 23
Model MS510TXPP supports 8 PoE+ ports. The switch can supply up to 30W PoE+ (IEEE 802.3at) to each port up to its total maximum PoE power budget of 180W across…
- 4. Installationp. 25
Installation This chapter describes the installation procedures for the switch. Switch installation involves the steps described in the following sections: •…
- Step 1: Prepare the sitep. 26
Before you install the switch, make sure that the operating environment meets the site requirements that are listed in the following table. Table 7. Site…
- Step 2: Protect against electrostatic dischargep. 26
WARNING: Static electricity can harm delicate components inside your switch. To prevent static damage, discharge static electricity from your body before you…
- Step 3: Unpack the switchp. 27
The following figure shows the package contents. Description Letter Switch a Power cord with adapter b Category 5e (Cat 5e) flat Ethernet cable c Wall-mounting…
- Step 4: Install the switchp. 28
You can install the switch in a standard 19-inch (48.26-centimeter) network equipment rack or on a flat surface. Install the switch in a rack To install the…
- Optional Step 5: Install an SFP Transceiver Modulep. 29
The following optional procedure describes how to install an optional SFP transceiver module into the SFP+ port of the switch. Hardware Installation Guide 29…
- Step 6: Connect devices to the switchp. 30
The following procedure describes how to connect devices to the switch’s RJ-45 ports. The switch supports Auto Uplink technology, which allows you to attach…
- Step 7: Check the installationp. 31
Before you apply power to the switch, perform the following steps. To check the installation: 1. Inspect the equipment thoroughly. 2. Verify that all cables…
- Step 8: Apply power and check the LEDsp. 31
The switch does not provide an on/off power switch. The power cord connection controls the power. Before connecting the power cord, select an AC outlet that is…
- Step 9: Manage the switchp. 31
The switch contains built-in web browser–accessible software for viewing, changing, and monitoring the way it functions. This management software is not…
- 5. Troubleshootingp. 33
Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE…
- Troubleshooting chartp. 34
The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 8. Troubleshooting chart Possible Solution…
- PoE Troubleshooting Suggestionsp. 35
Here are some tips for correcting PoE problems that might occur: • Make sure that the PoE Max LED is off. If the PoE Max LED is solid yellow, disconnect one or…
- Additional troubleshooting suggestionsp. 36
If the suggestions in the troubleshooting chart do not resolve the problem, see the following troubleshooting suggestions: • Network adapter cards. Make sure…