Loading manual…
Fisher & Paykel DD24STX6I1 installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 52
- Models
- DD24STX6HI1DD24STX6I1
Open PDFOpens the file on fisherpaykel.com.
Contents
- Components requiredp. 3
TOOLS PARTS Supplied and required F 4x Side brackets F 1x Sealing tape F 1x Door bracket kit F 16x 16mm Crosshead screws F 2x 38mm Chassis feet fixing screws…
- Accessing your product specificationsp. 4
A B C D E F For full product, cabinetry and service specifications, refer to the Planning Guide. To access the Planning Guide, scan the QR code or visit…
- Prior to installationp. 6
1. Refer to the Planning Guide for cabinetry, cavity, panel and service specifications. fisherpaykel.com/specify 2. Ensure the cabinet meets the minimum cavity…
- Prior to installation - servicesp. 8
2. The vent duct cut out is 3 15/16" x 8 21/32". 3. Framed cabinetry: The cut out should be placed 1" back from the frame. If routed through the cabinet toe…
- Unpack all productsp. 10
1. Remove the plastic wrap. 2. Remove the top packaging. Leave the base on to protect the floor surface while moving the dishwasher. 3. Do not remove door…
- hard wiring (optional)p. 12
A qualified electrician is required to hard wire the dishwasher. Remove the supplied power cord and complete the hard-wiring close to the cavity. 1. Pull the…
- Apply sealing tapep. 17
1. Ensure underside of countertop is clean and free of dust. 2. Remove backing from tape 3. Apply tape to top edge of cabinet ensuring it is centred and set…
- DISHWASHER SECURING OPTIONSp. 18
1. Securing through chassis sides: Screws must be fixed through the chassis sides and into the cabinet sides or packers. The dishwasher must be secured to stay…
- Attach bracketsp. 19
The brackets must lie flat on the chassis with the locking tabs facing out. The locking tabs must be properly inserted through the slots to secure the…
- Attach Spacersp. 20
1. Snap off the four spacers with an adhesive strip. 2. Place spacers on each side of the dishwasher between the brackets. 3. If required a larger spacer…
- Attach top trimp. 21
1. Align the trim to the chassis ensuring the arrow is pointing forward. 2. Firmly push the trim into the slots to secure it over the rubber seal. 3. Ensure…
- Attach vent hosep. 22
1. Rotate the elbow to the left or right depending on your venting location. The vent can be routed under the dishwasher. Ensure the cut out size allows the…
- Push inside cavityp. 23
1. Place hoses and cords through the service holes and into the adjacent cavity. 2. Carefully push the dishwasher into the cavity, feeding the hoses through…
- Measure custom panelp. 24
B 1. Measure the distance from the adjacent cupboard doors to the edges of the door bracket. If panels widths or heights are extended over the minimum…
- Attach panel to door bracketp. 25
1. Rotate the drawer bracket pins by a quarter turn. Use pliers to pull the door pin out. 2. Detach the door bracket by pulling down firmly and then angling…
- Install knock-to-pause modulep. 28
1. Secure knock-to-pause module to the panel using the supplied screws. 2. Check that the module is oriented correctly and fixed securely to ensure proper…
- Secure panelp. 29
1. Attach the earth wire to the door bracket to ensure safe use. 2. Place the panel back onto the dishwasher. Insert the side pins. Quarter turn the pins to…
- SECURE THROUGH CHASSIS SLOTp. 30
1. Pull the drawer halfway out to remove the tub. On each side of the tub, push locking tabs back. 2. Place the drawer on a protected surface to the left of…