Loading error codes…
Loading error codes…
Refrigerators & freezers
3 codes from the official Whirlpool WTH5244 NFX user manual, in the manual’s own words.
Freezer comp. Not Cold enough This caution will be seen especially after long term of power failure 1. Do not freeze the foods that are thaw and use in short time period. 2. Set the freezer temperature to colder values or set the super freeze, until the compartment gets to normal temperature. 3. Do not put fresh food until this failure is off.
Page 23 of the manual →Refrigerator comp. Not Cold enough Ideal temperature for Ref. Compartment is +4 oC. If you see this warning your foods have risk of spoiling. 1. Set the refrigerator temperature to colder values or set the super cooling mode until the compartment gets to normal temperature. 2. Do not open the door much until this failure is off. LF and LC not cold enough It is the combination of LF and LC Error type You will see this failure when first starting the appliance. It will be off after the compartments gets normal temperature
Page 23 of the manual →Refrigerator comp. too Cold The foods starts to freeze because of the too much cold temperature 1. Check if the “Super cooling mode” is on 2. Increase the refrigerator temperature values LOPO Low voltage Warning When the power supply gets lower than 170 V the appliance gets to steady position. This not a failure. This prevents any damages on the compressor. This warning will off after the voltage gets required level
Page 23 of the manual →Code not listed or still showing? See all Whirlpool WTH5244 NFS manuals or contact Whirlpool service.