Loading error codes…
Loading error codes…
Washing machines
13 codes from the official Samsung WW80K5410UW user manual, in the manual’s own words.
Make sure the cold water supply hose is firmly connected to the cold water tap. If it is connected to the hot water tap, the laundry may be deformed with some cycles.
Page 54 of the manual →Water is not draining. • Make sure the drain hose is not frozen or clogged. • Make sure the drain hose is positioned correctly, depending on the connection type. • Clean the debris filter as it may be clogged. • Make sure the drain hose is straightened all the way to the drain system. • If the information code remains, contact a customer service centre.
Page 54 of the manual →Operating the washer with the door open. • Make sure the door is properly closed. • Make sure laundry is not caught in the door.
Page 54 of the manual →Water has overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre.
Page 54 of the manual →Check the drain hose. • Make sure the end of the drain hose is not placed on the floor. • Make sure the drain hose is not clogged. • If the information code remains, contact a customer service centre.
Page 54 of the manual →Spinning does not work. • Make sure laundry is spread out evenly. • Make sure the washing machine is on a flat, stable surface. • Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory, and an “Ub” check message will be shown in the display.
Page 54 of the manual →Check the motor for operation. • Try restarting the cycle. • If the information code remains, contact a customer service centre. Untitled-6 54 2017-12-12 3:18:04
Page 54 of the manual →The electronic control needs to be checked. • Check if power is supplied properly. • If the information code remains, contact a customer service centre. Low voltage detected. • Check if the power cord is plugged in. • If the information code remains, contact a customer service centre.
Page 55 of the manual →High temperature heating check. • If the information code remains, contact a customer service centre.
Page 55 of the manual →The Water Level sensor is not working properly. • Turn the machine off, and restart the cycle. • If the information code remains, contact a customer service centre.
Page 55 of the manual →Check communications between main and sub PBAs. • Turn the machine off, and restart the cycle. • If the information code remains, contact a customer service centre. DDC, ddC This message appears when you open the Add Door without pressing Start/Pause. If this happens, do one of the following: • Press the Add Door to close properly. Then, press Start/Pause and try again. • To add laundry, open the Add Door and input laundry. Close the Add Door properly. Then, press Start/Pause to resume operation.
Page 55 of the manual →The MEMS sensor is not working properly. • Turn the machine off, and restart the cycle. • If the information code remains, contact a local Samsung service centre.
Page 55 of the manual →Check communications between the main and the inverter PBAs. • Depending on the state, the machine may automatically returns to normal operation. • Turn the machine off, and restart the cycle. • If the information code remains, contact a local Samsung service centre. Untitled-6 55 2017-12-12 3:18:04
Page 55 of the manual →Code not listed or still showing? See all Samsung WW80K5410UW manuals or contact Samsung service.