Loading error codes…
Loading error codes…
Bespoke Slide · Cooktops & hobs
6 codes from the official Samsung Bespoke Slide (NSI6DG9550SRAA) user manual, in the manual’s own words.
This code occurs if communication between the Main and Inverter PBA is interrupted. Power Off, and then Power On to the setting you want again. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
Page 70 of the manual →The top sensor is open when the burner is operating. Call for service The top sensor is short when the burner is operating.
Page 70 of the manual →The IGBT sensor is open when the burner is operating. The IGBT sensor is short when the burner is operating.
Page 70 of the manual →The sub PCB sensor is open when the oven is operating. Tap Stop, and then restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. There is a short in the sub PCB sensor.
Page 70 of the manual →The main PCB sensor is open when the oven is operating. There is a short in the main PCB sensor.
Page 70 of the manual →This code occurs if the PCB temperature rises abnormally high. Call for service This error message appears if the power cord is installed improperly. If the power connection is plugged in improperly, that code appears on the display. Reconnect the power connection properly, and the message disappears. C-A2 This code occurs if the sub PCB temperature rises abnormanlly high. Tap Stop. Check the oven vent and cooling vent. If the vent is closed, never block the vent by anything. After cooling the oven, restart the oven. If this does not solve the problem, call for service.
Page 70 of the manual →Code not listed or still showing? See all Samsung NSI6DG9550SRAA manuals or contact Samsung service.