Loading error codes…
Loading error codes…
Bespoke Smart Slide · Ovens & ranges
4 codes from the official Samsung Bespoke Smart Slide (NSE70H63SRAA) user manual, in the manual’s own words.
The oven sensor is open when the oven is operating. There is a short in the Oven sensor.
Page 77 of the manual →The sub PCB sensor is open when the oven is operating. Press Stop/Clear, and then restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. There is a short in the sub PCB sensor.
Page 77 of the manual →The main PCB sensor is open when the oven is operating. There is a short in the main PCB sensor.
Page 77 of the manual →This code occurs if the PCB temperature rises abnormally high. Call for service. Bad line This error message appears if the power cord is installed improperly. If the power connection is plugged in improperly, that code appears on the display. Reconnect the power connection properly, and the message disappears. C-A2 This code occurs if the sub PCB temperature rises abnormanlly high. Press Stop/Clear. Check the oven vent and cooling vent. If the vent is closed, never block the vent by anything. After cooling the oven, restart the oven. If this does not solve the problem, call for service.
Page 77 of the manual →Code not listed or still showing? See all Samsung NSE70H63SRAA manuals or contact Samsung service.