Loading error codes…
Loading error codes…
Dryers
7 codes from the official Samsung DV90TA240AE (DV90TA240AE/ET) user manual, in the manual’s own words.
Air temperature sensor issue Clean the lint filter and/or heat exchanger. If this continues, call for service.
Page 52 of the manual →Compressor temperature sensor issue Wait 2-3 minutes. Turn the power on and restart.
Page 52 of the manual →Running the dryer with door open Close the door and restart. If this continues, call for service.
Page 52 of the manual →Compressor overheat Call for service.
Page 52 of the manual →Water tank full Drain pump is out of order Empty the water tank, turn the power on, and restart. If this continues, call for service.
Page 52 of the manual →Check communications between the main and the inverter PBAs. • Depending on the state, the dryer may automatically returns to normal operation. • Turn the dryer off and turn it on again. Then, restart the cycle. • If the information code continues to appear, call for service.
Page 52 of the manual →Check the motor for operation. • Try restarting the cycle. • If the information code continues to appear, call for service. FIL+tEr (Buzzer rings) Heat exchanger needs to be cleaned Clean the heat exchanger. For any codes not listed above, or if the information code continues to appear, call for service. DV5000T_DC68-04209F-00_EN.indd 52 2020/9/8 14:05:50
Page 52 of the manual →Code not listed or still showing? See all Samsung DV80TA020TH/ET manuals or contact Samsung service.