Gigabyte J4005N D2P user manual

Contents

1. J4005N D2P Motherboard Layoutp. 4

   * The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change…

2. Chapter 1 Hardware Installationp. 5

   1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of…

3. 1-1 Installation Precautionsp. 5

   The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to…

4. 1-2 Product Specificationsp. 6

   CPU Š Š Built in with an Intel® Dual-Core Celeron® J4005 SoC (2.7 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to…

5. 1-3 Installing the Memoryp. 8

   Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of…

6. 1-4 Installing an Expansion Cardp. 8

   Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual…

7. 1-5 Back Panel Connectorsp. 8

   Parallel Port Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also called a printer port. Serial Port Use the…

8. 1-6 Internal Connectorsp. 10
9. Chapter 2 BIOS Setupp. 16

   BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the…

10. 2-1 Startup Screenp. 16

    The following startup Logo screen will appear when the computer boots.

11. 2-2 Mainp. 17

    Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept…

12. 2-3 Advancedp. 18

    & & OnBoard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of…

13. 2-4 Securityp. 22

    Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Version 2.19.1268. Copyright (C) 2018 American Megatrends, Inc. Password Description If ONLY…

14. 2-5 Bootp. 23

    & & Setup Prompt Timeout Allows you to configure the number of seconds to stay in BIOS setup prompt screen. (Default: 1) & & Bootup NumLock State Enables or…

15. 2-6 Save & Exitp. 25

    & & Save Changes and Exit Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press…

16. Chapter 3 Appendixp. 26

    Drivers Installation • Before installing the drivers, first install the operating system. • After installing the operating system, insert the motherboard…

17. Drivers Installationp. 26

    Before installing the drivers, first install the operating system. • After installing the operating system, insert the motherboard driver disk into your…

18. Regulatory Statementsp. 27

    Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used…

19. Contact Usp. 30

    GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and…