Dell P7524QT (DELL-P7524QT) service manual

Contents

1. 页 1p. 1

   Version: 01 Date: 2023/06/16 Service Manual - P7524QT

2. 页 2p. 2

   Product Announcement: This product is certificated to meet RoHS Directive and Lead-Free produced definition. Using approved critical components only is…

3. 页 3p. 3

   2. Exploded view diagram with list of items 4. Select the appropriate service or support link based on your need. 1. Go to https://www.dell.com/support. NOTE…

4. 页 4p. 4

   3. Wiring Connectivity Diagram

5. 页 5p. 5

   4. How to connect and disconnect power cable/ connectivity cable WARNING: To change power cable/ connectivity cable, switch off power before unplugging the…

6. 页 6p. 6
7. 页 7p. 7
8. 页 8p. 8

   5. Disassembly and Assembly Procedures 5.1 Disassembly Procedures: Tool Required: List the type and size of the tools that would typically can be used to…

9. 页 9p. 9

   5. Disassembly and Assembly Procedures S11 S8 S10 S9 S12 S13 S14 Use a screwdriver to remove 8pcs screws for unlocking speakers. (Torque: 6kgf±0.5) S7 Use a…

10. 页 10p. 10

    5. Disassembly and Assembly Procedures S15 S16 S17 S18 Use a tripper to lift up the unit, then use a screwdriver to remove 10pcs screws for unlocking the ED…

11. 页 11p. 11

    5. Disassembly and Assembly Procedures Use a screwdriver to remove 17pcs screws for unlocking the L/B heat sink with the back bracket. (Torque: 3±0.3kgf) S19…

12. 页 12p. 12

    5. Disassembly and Assembly Procedures (Torque: 5±0.3kgf) Put 1pcs back bracket on the working table, then take 2pcs VESA brackets to assemble with the back…

13. 页 13p. 13

    5. Disassembly and Assembly Procedures Take 1pcs bottom-middle bezel to assemble with the assembled back bracket, then use a screwdriver to lock bottom-middle…

14. 页 14p. 14

    5. Disassembly and Assembly Procedures Use a sucking tool to suck 1pcs glass and set it on a jip, then check the glass carefully and make sure no particles on…

15. 页 15p. 15

    5. Disassembly and Assembly Procedures Use a roller to clean the film as the direction of the arrow. Use a sucking tool to move the O/C with glass module to…

16. 页 16p. 16

    5. Disassembly and Assembly Procedures Paste 1pcs shading foam on the strip as the picture 1 shown, then assemble 1pcs key board holder with the strip, then…

17. 页 17p. 17

    5. Disassembly and Assembly Procedures Assemble 1pcs power board, 1pcs driver board, 1pcs touch board, 1pcs T-Con board and 2pcs FFC cables with back bracket…

18. 页 18p. 18

    5. Disassembly and Assembly Procedures Paste 22pcs black tapes for fixing the cables as the picture below shown. Paste 1pcs conductive tape on the specific…

19. 页 19p. 19

    6. Trouble Shooting Instructions Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions . Self-Test…

20. 页 20p. 20

    6. Trouble Shooting Instructions or Dell 75 Monitor No HDMI 3 Cable The display will go into Standby Mode in 4 minutes. www.dell.com/P7524QT P7524QT or Dell 75…

21. 页 21p. 21

    6. Trouble Shooting Instructions Built-in Diagnostics Your display has a built-in diagnostic tool that helps you determine if the screen abnormality you are…

22. 页 22p. 22

    6. Trouble Shooting Instructions Common Problems The following table contains general information about common display problems you might encounter and the…

23. 页 23p. 23

    6. Trouble Shooting Instructions Common Symptoms What You Experience Possible Solutions Brightness Problems Picture too dim or too bright • Reset the display…

24. 页 24p. 24
25. 页 25p. 25

    6. Trouble Shooting Instructions Touchscreen Problems Speciȶc Symptoms What You Experience Possible Solutions Touch report error Touch function miss alignment…

26. 页 26p. 26

    6. Trouble Shooting Instructions Speciȶc Symptoms What You Experience Possible Solutions Wireless USB peripherals stop working when a USB 3.0 device is plugged…