BenQ MH750 (9H.JFG77.23E) user manual

Contents

1. Important safety instructionsp. 3

   Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to…

2. Introductionp. 7

   Introduction Projector features The projector offers the following features • SmartEco™ starts your dynamic power saving The SmartEco™ technology offers a new…

3. Positioning your projectorp. 18

   Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations: Your room layout or…

4. Connectionp. 21

   Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal…

5. Operationp. 24

   Operation Starting up the projector 1. Remove the lens cap. 2. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch…

6. Maintenancep. 58

   Maintenance Care of the projector Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean. Never…

7. Troubleshootingp. 67

   Troubleshooting The projector does not turn on. No picture. Blurred image. Remote control does not work. The password is incorrect. Cause Remedy There is no…

8. Specificationsp. 68

   Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution 1920 x 1080 Display system Single-chip DLP™…

9. Warranty and Copyright informationp. 76

   Warranty and Copyright information Limited warranty BenQ warrants this product against any defects in material and workmanship, under normal usage and storage.…