ASUS RNUC15CRKC500002 (90AR00R2-M00060) user manual

Contents

1. Safety and caution informationp. 6

   Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories from other products…

2. Front view (NUC15CRK)p. 8

   Rear view (NUC15CRK) USB 20Gbps Type-C ® port HDMI™ port USB 10Gbps port LAN Port Power button USB 2.0 port Power input Thunderbolt™ 4 Type-C ® port 2 with…

3. Rear view (NUC15CRK)p. 8

   USB 20Gbps Type-C ® port HDMI™ port USB 10Gbps port LAN Port Power button USB 2.0 port Power input Thunderbolt™ 4 Type-C ® port 2 with DisplayPort 2.1…

4. Front view (NUC15CRH)p. 9

   Rear view (NUC15CRH) USB 20Gbps Type-C ® port HDMI™ port USB 10Gbps port Thunderbolt™ 4 Type-C ® port 1 with DisplayPort 2.1 Power button LAN Port Power input…

5. Rear view (NUC15CRH)p. 9

   USB 20Gbps Type-C ® port HDMI™ port USB 10Gbps port Thunderbolt™ 4 Type-C ® port 1 with DisplayPort 2.1 Power button LAN Port Power input USB 2.0 port Back…

6. NUC Mini PC setup guidep. 10

   Connecting the display HDMI™ port Type-C® DisplayPort NUC15CRK NUC15CRH NUC15CRH NUC15CRK

7. Connecting the displayp. 10
8. Connecting the keyboard and mousep. 13
9. Connecting the LAN cablep. 15

   LAN port LED indications: Link LED Speed LED Speed LED Status Description OFF 100 Mbps / 10 Mbps connection YELLOW 1 Gbps connection GREEN 2.5 Gbps connection…

10. Connecting the power adapterp. 16
11. Powering on the systemp. 18

    NOTE: To view the current power management settings in Windows ® 11, click the Start Button. Type Power Management, then press <Enter>. Default settings on a…

12. Managing power modesp. 19

    Putting your NUC system to the Off mode with fast startup enabled You can put your NUC system to the Off mode with fast startup enabled: Enter Control Panel in…

13. Enabling fast startupp. 21

    You can shut down the your NUC system with fast startup enabled. To enable fast startup in Shutdown settings: Enter Control Panel in the search bar and open it…

14. NUC component integration guidep. 22

    IMPORTANT! ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. NOTE: The…

15. Safety precautionsp. 22

    This device is intended for use in ambient temperatures between 0°C and 40°C (32°F and 104°F). Avoid using or storing next to heat sources, in direct sunlight…

16. Care during usep. 23

    Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a…

17. Before you beginp. 24

    1. Read the entire manual before starting any service procedures and follow all instructions. 2. Back up your NUC system. 3. Turn off your NUC system. 4. Place…

18. Opening systemp. 25

    1. Completely loosen the latch lock screw. 2. Lift the latch lock to unlock the bottom cover. 3. Lift and flip open the bottom cover.

19. DDR5 SODIMM/CSODIMM installationp. 26

    1. Align the small space at the bottom edge of the DDR5 SODIMM/CSODIMM with the key on the SODIMM slot, then insert the DDR5 SODIMM/CSODIMM into the SODIMM…

20. M.2 installationp. 27

    2280 M.2 1. Insert the M.2 module into the M.2 slot on the system board. 2. Rotate the Q-Latch counterclockwise to secure the M.2 module in place.

21. Optional 2280 M.2 expansion (only for NUC15CRH)p. 29

    NOTE: The module for optional 2280 M.2 is purchased separately. 1. Remove the two (2) screws securing the back panel faceplate. 2. Remove the back panel…

22. Optional LAN expansion (only for NUC15CRH)p. 34

    NOTE: The module for optional LAN expansion is purchased separately. 1. Remove the two (2) screws securing the back panel faceplate. 2. Remove the back panel…

23. Optional LAN and COM expansion (only for NUC15CRH)p. 36

    NOTE: The module for optional LAN and COM expansion is purchased separately. 1. Remove the two (2) screws securing the back panel faceplate. 2. Remove the back…

24. Closing systemp. 38

    1. Close the bottom cover. NOTE: Ensure the bottom cover is closed properly. A loud click should be heard when the bottom cover is properly closed. 2. Secure…

25. VESA mount installationp. 39

    2. Attach the two (2) bundled slightly larger black screws to the bottom chassis cover of the NUC system.