ViewSonic VG2440 user manual

Contents

1. Safety Precautionsp. 3

   Please read the following Safety Precautions before you start using the device. • Keep this user guide in a safe place for later reference. • Read all warnings…

2. Introductionp. 7

   Package Contents • Display • Power cord • Video cable • USB cable • Quick start guide NOTE: The power cord and video cables included in your package may vary…

3. Product Overviewp. 8

   Front View NOTE: For more information about the 1(ViewMode)/2/3/4/5 key and its functions, refer to “Hot Keys” on page 28. Rear View 8 1 2 3 4 5 6 7 8 1. AC IN…

4. Initial Setupp. 9

   This section provides detailed instructions for setting up your monitor. NOTE: The monitor comes packaged in a user-friendly box to make installation easy

5. Installing the Standp. 9

   1. Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray. 2. Remove the monitor stand’s base…

6. Wall Mountingp. 12

   Refer to the table below for the standard dimensions for wall mount kits. NOTE: For use only with a UL Listed Wall Mount Bracket. To obtain a wallmounting kit…

7. Using the Security Slotp. 14

   To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. Additionally, fastening the monitor to…

8. Making Connectionsp. 15

   This section guides you on how to connect the monitor with other equipment

9. Connecting to Powerp. 15

   1. Connect the power cord to the AC IN jack at the rear of the device. 2. Connect the power cord plug to a power outlet. 1 2

10. Connecting External Devicesp. 16

    HDMI Connection Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.…

11. Using the Monitorp. 21

    Adjusting the Viewing Angle For optimal viewing, you can adjust the viewing angle using any of the following methods: Height Adjustment Lower or raise the…

12. Adjusting the Viewing Anglep. 21

    For optimal viewing, you can adjust the viewing angle using any of the following methods: Height Adjustment Lower or raise the monitor to the desired height (0…

13. Turning the Device On/Offp. 25

    1. Plug the power cord into a power outlet. 2. Press the Power button to turn on the monitor. 3. To turn the monitor off, press the Power button again. NOTE…

14. Using the Control Panel Keysp. 26

    Use the control panel keys to access the Quick Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change the settings. 1 (ViewMode) 3 5 4…

15. Configuring the Settingsp. 30

    General Operations Key Guide 1. Press the 5 key to display the OSD Menu. 1920 X 1080 @ 60Hz Setup Menu Color Adjust ViewMode Manual Image Adjust Input Select…

16. Appendixp. 45

    Specifications Item Category Specifications LCD Type VA, a-Si TFT LCD Module 1920 x 1080 LCD 0.2715 (H)mm x 0.2715 (V)mm pixel pitch Display Size 59.8 cm…

17. Specificationsp. 45

    Item Category Specifications LCD Type VA, a-Si TFT LCD Module 1920 x 1080 LCD 0.2715 (H)mm x 0.2715 (V)mm pixel pitch Display Size 59.8 cm (23.6” viewable)…

18. Glossaryp. 48

    This section describes the standard glossary of terms used in all LCD display models. All terms are listed in alphabetical order. NOTE: Some terms may not be…

19. Troubleshootingp. 53

    This section describes some common problems that you may experience when using the monitor. Problem or Issue Possible Solutions No power • Make sure you have…

20. Maintenancep. 55

    General Precautions • Make sure the monitor is turned off and the power cable is unplugged from the power outlet. • Never spray or pour any liquid directly…

21. Product Upgradeability and Repairabilityp. 56

    The following is a list of hardware features available for at least 5 years after the sale of the product. Upgradable Repairable Replaceable Main Processor(s)…

22. Regulatory and Service Informationp. 57

    Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer…

23. Compliance Informationp. 57

    This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels…

24. TCO Informationp. 60

    A third-party certification according to ISO 14024 Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks…

25. Copyright Informationp. 61

    Copyright© ViewSonic® Corporation, 2020. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the…