BenQ LU935 (9H.JNN77.15E) user manual

Contents

1. Warranty and Copyright informationp. 2

   Limited warranty BenQ warrants this product against any defects in material and workmanship, under normal usage and storage. Proof of purchase date will be…

2. Important safety instructionsp. 4

   Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product…

3. Introductionp. 6

   Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of…

4. Positioning your projectorp. 11

   Choosing a location Before choosing an installation location for your projector, take the following factors into consideration: • Size and position of your…

5. Connectionp. 19

   When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for…

6. Operationp. 21

   Starting up the projector 1. Plug the power cord. Turn on the power outlet switch (where fitted). The power indicator on the projector lights orange after…

7. Menu operationp. 29

   Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. The menu items are…

8. Maintenancep. 47

   Care of the projector Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface. Please be sure to turn off the projector and let it…

9. Troubleshootingp. 50

   The projector does not turn on. Cause Remedy There is no power from the power cord. Plug the power cord into the AC power jack on the projector, and plug the…

10. Specificationsp. 51

    Projector specifications All specifications are subject to change without notice. Optical Resolution 1920 (H) x 1200 (V) Display system 1-CHIP DMD Lens LU935…