ASUS PG38UQ (90LM08M0-B01170) user manual

Contents

1. Noticesp. 4

   Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This…

2. Safety informationp. 5

   Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to…

3. Care & Cleaningp. 9

   Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the…

4. 1.1 Welcomep. 12

   Thank you for purchasing the ASUS ® LCD Gaming monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a…

5. 1.2 Package contentsp. 12

   Check your package for the following items: LCD Monitor Monitor Base Quick Start Guide Warranty Card Power Cord Ultra High Speed HDMI 2.1 Cable DP Cable USB…

6. 1.3 Attaching the Standp. 13

   1. Remove the input/output port cover from the rear of the monitor. Then remove the Allen wrench from the cover. 2. Replace the input/output port cover. Then…

7. 1.5 Monitor introductionp. 17

   1.5.1 Front/Side view Use the control button on the bottom of the monitor to adjust the monitor settings. 5 0 10 ≥5S Enter Back Input Select PIP/PBP Setup Exit…

8. 2.1 Adjusting the monitorp. 18

   For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold…

9. 2.2 Outline dimensionp. 19
10. 3.1 OSD (On-Screen Display) menup. 21

    3.1.1 How to reconfigure You can either use the remote control or the Control buttons on the monitor to navigate through the menu and make adjustments. Enter…

11. 3.3 Specificationsp. 31

    Panel type LCD Panel Size 38” W (96.52 cm) Max. Resolution 3840 x 2160 @ 144Hz Pixel Pitch 0.219 mm x 0.219 mm Brightness 350 nits(Typ.) Contrast Ratio…

12. 3.3 Troubleshooting (FAQ)p. 33

    Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to…

13. 3.4 Supported Timing Listp. 34