Dell R350 (F3W3N) service manual

Contents

1. Dell EMC PowerEdge R350 Installation and Service Manualp. 1

   Regulatory Model: E77S Regulatory Type: E77S001 December 2021 Rev. A01

2. About this documentp. 7

   This document provides an overview about the system, information about installing and replacing components, diagnostic tools, and guidelines to be followed…

3. PowerEdge R350 system overviewp. 8

   The PowerEdge R350 system is a 1U server that supports: • One Intel Xeon E-2300 series processor or one Intel Pentium processor • Four DDR4 DIMM slots • Two…

4. Initial system setup and configurationp. 15

   This section describes the tasks for initial setup and configuration of the Dell EMC system. The section also provides general steps to set up the system and…

5. Minimum to POST and system management configuration validationp. 19

   This section describes the minimum to POST system requirement and system management configuration validation of the Dell EMC system. Topics: • Minimum…

6. Installing and removing system componentsp. 21

   Topics: • Safety instructions • Before working inside your system • After working inside your system • Recommended tools • Optional front bezel • System cover…

7. Jumpers and connectorsp. 91

   This section provides essential and specific information about jumpers and switches. It also describes the connectors on the various boards in the system.…

8. System diagnostics and indicator codesp. 94

   This section describes the diagnostic indicators on the system front panel that displays the system status during system startup. Topics: • System health and…

9. Getting helpp. 102

   Topics: • Recycling or End-of-Life service information • Contacting Dell Technologies • Accessing system information by using QRL • Receiving automated support…

10. Documentation resourcesp. 105

    This section provides information about the documentation resources for your system. To view the document that is listed in the documentation resources table…