ViewSonic XG2431 user manual

Contents

1. Safety Precautionsp. 3

   Please read the following Safety Precautions before you start using the device. • Keep this user guide in a safe place for later reference. • Read all warnings…

2. Introductionp. 7

   Package Contents • Monitor • Power cord • Video cable • Quick start guide NOTE: The power cord and video cables included in your package may vary depending on…

3. Product Overviewp. 8
4. Initial Setupp. 9

   Installing the Stand 1 2 NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or…

5. Installing the Standp. 9

   2 NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

6. Wall Mountingp. 10

   NOTE: Only use UL Certified wall mount kits. HDMI 1 2 DP 100 mm 100 mm Refer to the table below for the standard dimensions for wall mount kits. Maximum…

7. Using the Security Slotp. 11

   To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. Additionally, fastening the monitor to…

8. Using the Mouse Anchorp. 12

   Included at the rear of the display, under the I/O ports, are two mouse anchors. Use these to prevent mouse cable dragging and personalize your mouse use setup.

9. Making Connectionsp. 13

   This section guides you on how to connect the monitor with other equipment

10. Connecting to Powerp. 13

    1. Connect the power cord to the AC IN jack at the rear of the device. 2. Connect the power cord plug to a power outlet. HDMI 1 2 DP 1 2

11. Connecting External Devicesp. 14
12. Using the Monitorp. 15

    Adjusting the Viewing Angle Tilt Angle Adjustment Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 15˚). NOTE: When adjusting…

13. Adjusting the Viewing Anglep. 15

    Tilt Angle Adjustment Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 15˚). NOTE: When adjusting, support the stand firmly with one…

14. Turning the Device On/Offp. 16

    1. Plug the power cord into a power outlet. 2. Press the Power button to turn on the monitor. 3. To turn the monitor off, press the Power button again. NOTE…

15. Configuring the Settingsp. 20

    General Operations 1. Press the 2/3/4/5 key to display the On-Screen Display (OSD) Menu. 2560 x 1440 @ 60Hz 75% Setup Menu Color Adjust ViewMode Manual Image…

16. Appendixp. 26

    Specifications Item Category Specifications LCD Type a-SI, TFT Active Matrix 1920 x 1080 LCD; 0.2745 (H)mm x 0.2745 (V)mm pixel pitch Display Size 62.23 cm…

17. Specificationsp. 26

    Item Category Specifications LCD Type a-SI, TFT Active Matrix 1920 x 1080 LCD; 0.2745 (H)mm x 0.2745 (V)mm pixel pitch Display Size 62.23 cm, 24.5" Color…

18. Glossaryp. 28

    This section describes the standard glossary of terms used in all LCD display models. All terms are listed in alphabetical order. NOTE: Some terms may not be…

19. Troubleshootingp. 32

    This section describes some common problems that you may experience when using the monitor. Problem or Issue Possible Solutions No power • Make sure you have…

20. Maintenancep. 34

    General Precautions • Make sure the monitor is turned off and the power cable is unplugged from the power outlet. • Never spray or pour any liquid directly…

21. Regulatory and Service Informationp. 35

    Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer…

22. Compliance Informationp. 35

    This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels…

23. Copyright Informationp. 38

    Copyright© ViewSonic® Corporation, 2020. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the…