ASUS MCI-10G/X550-2T (90SC08I0-M0UAY0) user manual

Contents

1. About this guidep. 4

   This user guide contains the information you need when installing and configuring the server management board

2. How this guide is organizedp. 4

   This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the MCI-10G/X550-2T Ethernet card features and the new…

3. MCI-10G/X550-2T specifications summaryp. 6

   * Please refer to ASUS website for Approved Vendor List (AVL). ** Specifications are subject to change without notice. Speed & Ports 10 Gigabit/s Ethernet 10G…

4. Chapter 1: Product Introductionp. 7
5. 1.1 Welcome!p. 8

   Thank you for buying an ASUS ® MCI-10G/X550-2T 10 Gigabit/s Ethernet card! Before you start installing the Ethernet card, check the items in your package with…

6. 1.2 Package contentsp. 8

   Check your package for the following items

7. 1.3 System requirementsp. 8

   Before you install the MCI-10G/X550-2T Ethernet card, check if the system meets the following requirements: • Server or workstation motherboard with an OCP…

8. 1.4 Card layoutp. 9
9. 1.5 LED indicationsp. 10

   Activity / Link LED (LED2) Speed link LED (LED3) Status Description Status Description OFF No activity OFF 100 Mb/s link Green Link Yellow 1 Gb/s link Blinking…

10. 1.6 Installing the MCI-10G/X550-2T Ethernet cardp. 11

    To install a MCI-10G/X550-2T Ethernet card: 1. Prepare the Mezannine card. 2. Connect the black end of the signal cable to the OCP_LED1 header on the…

11. Chapter 2: Boot Agent Configurationp. 13
12. 2.1 Intel(R) Boot Agent XEp. 14

    The Intel(R) Boot Agent XE provides hardware-based Ethernet card configurations. To start the Intel(R) Boot Agent XE and access the main screen: 1. Turn on the…

13. 2.2 Intel(R) iSCSI Remote Bootp. 15

    The Intel(R) iSCSI Remote Boot provides hardware-based Ethernet card configurations. To start the Intel(R) iSCSI Remote Boot and access the main screen: 1.…

14. 2.3 Intel(R) Ethernet Flash Firmware Utilityp. 18

    The Intel(R) Ethernet Flash Firmware Utility allows you to switch between PXE option ROM and iSCSI option ROM. Note that only one option ROM can be used at a…

15. Chapter 3: Driver Installationp. 21
16. 3.1 Windows® Server OS Driver Installationp. 22

    3-2 Chapter 3: Driver Installation 3.1 Windows ® Server OS Driver Installation To update the Ethernet card driver for Windows ® Server OS: 1. Restart the…

17. 3.2 Linux OS Driver Installationp. 25

    To install the Ethernet card driver for Linux OS: 1. Within the Linux Terminal, place the driver in root/tmp: For Red Hat Enterprise Linux 6.5 (Red Hat…

18. Appendixp. 29
19. Simplified EU Declaration of Conformityp. 30
20. ASUS contact informationp. 31

    ASUSTeK COMPUTER INC. (Taiwan) Address 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan Telephone +886-2-2894-3447 Fax +886-2-2890-7798 Web site…

Other documents for this model

• ASUS MCI-10G/82599-2S (90SC08J0-M0UAY0) user manual