Gigabyte H410M S2H V3 user manual

Contents

1. H410M S2H V3 Motherboard Layoutp. 4

   * The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change…

2. Chapter 1 Hardware Installationp. 5

   1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of…

3. 1-1 Installation Precautionsp. 5

   The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to…

4. 1-2 Product Specificationsp. 6

   CPU Š Š Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/ Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel®…

5. 1-3 Installing the CPUp. 9

   Please visit GIGABYTE's website for details on hardware installation. Installing the CPU Locate the alignment keys on the motherboard CPU socket and the…

6. 1-4 Installing the Memoryp. 9

   Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of…

7. 1-5 Installing an Expansion Cardp. 10

   Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual…

8. 1-6 Back Panel Connectorsp. 10

   PS/2 Keyboard and PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard. D-Sub Port The…

9. 1-7 Internal Connectorsp. 12

   Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •…

10. Chapter 2 BIOS Setupp. 19

    Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS.…

11. 2-1 Startup Screenp. 19

    The following startup Logo screen will appear when the computer boots. Function Keys • When the system is not stable as usual, select the Load Optimized…

12. 2-2 The Main Menup. 20

    Hardware Information Option Description Current Settings Setup Menus Configuration Items System Time Quick Access Bar allows you to quickly move to the General…

13. 2-3 Favorites (F11)p. 21

    Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where all of your favorite options are located. To add…

14. 2-4 Tweakerp. 22

    Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing…

15. 2-5 Settingsp. 27

    ƒƒ Platform Power & & Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled) & & PEG ASPM Allows…

16. 2-6 System Infop. 32

    This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the…

17. 2-7 Bootp. 33

    & & Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On) & & Security Option Specifies…

18. 2-8 Save & Exitp. 36

    & & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc>…

19. Chapter 3 Appendixp. 37

    Please visit GIGABYTE's website for more software information. • Before installing the drivers, first install the operating system. • After installing the…

20. Drivers Installationp. 37
21. Regulatory Noticesp. 38

    United States of America, Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital…

22. Contact Usp. 39

    GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and…