ASUS ZenBeam E2 (90LJ00H3-B01170) user manual

Contents

1. About this manualp. 5

   This manual provides information about the hardware and software features of your LED projector through the following chapters: Chapter 1: Knowing your LED…

2. Conventions used in this manualp. 6

   To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to…

3. Safety precautionsp. 7

   Using your LED projector • Refer to the manual and take note of the safety instructions before operating your LED projector. • Follow the notes and warnings…

4. Chapter 1: Knowing your LED projectorp. 11
5. Featuresp. 12

   Top View Control panel buttons The control panel buttons allow you to navigate the onscreen display menu. Individually, these buttons also correspond to a…

6. Chapter 2: Setting upp. 23
7. Operating your LED projectorp. 24

   This portable LED projector allows you to plug and play your devices so you can easily open multimedia files and hear audio straight from its built-in…

8. Chapter 3: Using the LED projectorp. 33
9. Using your LED projector for the first timep. 34

   NOTE: Ensure that your LED projector is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded…

10. Operating the onscreen display menup. 35

    Your LED projector is a plug-and-play device that also features an onscreen display menu that contains a set of programs and settings that can maximize your…

11. Using the Wi-Fi donglep. 36

    NOTE: If you wish to change the Wi-Fi band from 5GHz to 2.4GHz, press and hold the Input button for three (3) seconds and wait for another three (3) seconds to…

12. Onscreen display menu optionsp. 40

    You may refer to the following pages for details on each of the onscreen display menu options. Volume Select this menu option to adjust the volume of the audio…

13. Turning off your LED projectorp. 44

    1. Press the power button. 2. When the following screen appears, press the power button again to completely turn off your LED projector. If you need to turn on…

14. Appendicesp. 45
15. Federal Communications Commission Statementp. 46

    Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 Product name: LED…

16. Regional notice for Californiap. 47

    This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling

17. Canadian Department of Communications Statementp. 47

    This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the…

18. Global Environmental Regulation Compliance and Declarationp. 48

    ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in…

19. ASUS Recycling/Takeback Servicesp. 48

    ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for…

20. HDMI Connectivityp. 49
21. Supported PC Timingsp. 50
22. Specifications for E2 LED projectorp. 52