Loading manual…
BenQ InstaShow WDC10 (9H.JF878.N4E) installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 67
- Models
- 9H.JF878.N4EWDC10
Open PDFOpens the file on objects.icecat.biz.
Contents
- Copyrightp. 2
© 2016 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or…
- Disclaimerp. 2
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any…
- BenQ ecoFACTSp. 2
BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the “Bringing Enjoyment 'N Quality…
- Introductionp. 5
InstaShow™ is a wireless device for corporate meeting rooms. Users expect devices to respond instantly, apps to launch and to control at their fingertips, and…
- Product featuresp. 5
InstaShow™ is equipped with the following features: Features Description True Plug & Play Simply connect InstaShow™ into your USB and HDMI ports, then push the…
- Product specificationp. 7
Feature Color Black Video outputs HDMI 1.4, comply with HDCP Frame Rate Up to 30fps depending on environment Output resolution Video Timing: 1280x720 (720P)…
- Overviewp. 8
InstaShow Button InstaShow Host 1. Present key with LED indicator Press to start or stop presenting. 2. MODE key Press to pair with an InstaShow Host or to…
- Installationp. 10
This section will guide you on how to prepare the unit before its initial use
- Environment checkp. 10
Before installing your InstaShow™ kit, check the environmental conditions. 1. Do not install the device near heat sources like radiators or direct sunlight, or…
- Assembling the InstaShow Hostp. 11
Assemble the InstaShow Host with two antennas by turning the antennas clockwise (right) and counterclockwise (left) to fasten them tightly
- Setting up the InstaShow Hostp. 11
You are provided with four different ways to position the InstaShow Host. The total weight of the InstaShow Host Unit is150g. Attaching the InstaShow Host to…
- Positioning the InstaShow Host antennasp. 15
Once you have properly installed the InstaShow Host, follow the guidelines below to position the antennas to maximize signal reception: For ceiling…
- Connecting the HDMI cable and powerp. 16
Once the InstaShow Host has been positioned properly near the display, connect the HDMI cable and power to ensure signal transmission. To supply power to the…
- Setting up and powering an InstaShow Buttonp. 19
1. Connect the InstaShow Button’s HDMI and USB jacks to the corresponding inputs of a laptop. See the illustration. For BenQ IFP (Interactive Flat Panel)…
- Using Cable USB A(F) to USB A(M)p. 22
Two USB cables are provided for MacBook and Windows laptop users. One is about 15 cm, and the other is about 80 cm to suit your usage situation. 1. Insert the…
- Pairing a InstaShow Button and InstaShow Hostp. 23
A InstaShow™ set includes an InstaShow Host and two InstaShow Buttons, which are paired before shipment. In such a case, you don’t need to pair them again.…
- Waking up the InstaShow Hostp. 26
When the InstaShow Host’s power indicator turns 50% static green, press the Present key of the InstaShow Button to start a presentation, and the InstaShow Host…
- Storing InstaShow Buttons in the cradlep. 26
You are provided with two different ways to store the InstaShow Buttons in the cradle. Place the InstaShow Buttons in the cradle vertically (1) or horizontally…
- Resetting a InstaShow Hostp. 26
Resetting an InstaShow Host allows you to return the InstaShow Host to its original factory settings. You may want to reset the InstaShow Host because of…
- Resetting a InstaShow Buttonp. 27
Resetting an InstaShow Button allows you to return the InstaShow Button to its original factory settings. You may want to reset an InstaShow Button because it…
- Starting and stopping presentationsp. 30
This section will guide you on how to start and stop a presentation using InstaShow™
- Getting readyp. 30
Make sure that all the connected devices have been powered on and ready for the presentation. As your InstaShow™ could work with different projectors, IFPs…
- Starting presentationp. 30
on page 30 for details. 2. To stop a presentation, see Idle presentation on page 32 for details. 3. To learn more about InstaVideo, see Play video with…
- Idle presentationp. 32
1. To stop a presentation, press the Present key. 2. The device stops presenting, and the LED indicator of the InstaShow Button turns green. 3. Users can press…
- Play video with InstaShow™p. 33
Our exclusive InstaVideo function optimizes InstaShow™'s audiovisual settings to instantly switch from clear Presentation mode to smooth Video mode with stereo…
- Web managementp. 35
Your InstaShow™ is equipped with a web management interface that enables you to configure its features through a browser such as Google Chrome (version…
- Accessing the web management interfacep. 35
Logging into the web management interface via direct connection 1. Connect your InstaShow Host directly to a laptop using a network cable (RJ-45) and to a…
- Getting startedp. 39
You can now use the web management interface to configure various settings of your InstaShow Host. Top command buttons Change language 1. The default language…
- Troubleshootingp. 63
Category Problem Cause Solution Your screen Your screen is not appearing on the display when pressing the InstaShow Button. The system is locked. Web…