ASUS MG28UQ user manual

Contents

1. Noticesp. 3

   Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This…

2. Safety informationp. 5

   Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to…

3. Care & Cleaningp. 7

   Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the…

4. 1.1 Welcome!p. 9

   Thank you for purchasing the ASUS ® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of…

5. 1.2 Package contentsp. 9

   Check your package for the following items: LCD Monitor Monitor Base Quick Start Guide Warranty Card 1x Power Cord CD Manual 1x USB Cable 1x DisplayPort Cable…

6. 1.3 Assembling the monitorp. 10

   To assemble the monitor: 1. Place the display flat on a cloth on the table, assemble the base according to the drawing and use a coin to turn the screw tight.…

7. 1.4 Connect cablesp. 11
8. 1.5 Monitor introductionp. 12

   1.5.1 Using the Controls button Use the control button on the back of the monitor to adjust the image settings. 6 5 4 3 2 1 1. Power Button/Power Indicator: •…

9. 2.2 Adjusting the monitorp. 15

   For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold…

10. 3.1 OSD (On-Screen Display) menup. 16

    3.1.1 How to reconfigure User Mode GameVisual Scenery Mode sRGB Mode RTS/RPG Mode FPS Mode Cinema Mode Racing Mode FPS Mode HDMI-1 3840x2160@60Hz ASUS MG28U G…

11. 3.2 Specificationsp. 24

    Model MG28UQ Panel Size 28” (71.12 cm) Max. Resolution 3840 x 2160 Brightness (Typ.) 300 cd/m2 Intrinsic Contrast Ratio (Typ.) ≥1000:1 Viewing Angle (CR>10)…

12. 3.3 Troubleshooting (FAQ)p. 25

    Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to…

13. 3.4 Supported Timing Listp. 27