Loading manual…
Loading manual…
B-2 The names of the various parts of the
Parts and Their Functions B-2 The names of the various parts of the machine and their functions are described below. Before using the machine, carefully read…
Needle bar thread guide Pass the upper thread through the needle bar thread guide. 2 Needle plate The needle plate is marked with guides for sewing straight…
The keys with * are lit while they are ON. 1 LCD (liquid crystal display) Settings for the selected stitch and error messages for incorrect operations appear…
Pull the top of the flat bed attachment to open the accessory compartment. A presser foot accessory tray is stored in the accessory compartment of the flat bed…
may differ from the table below depending on your model. For more details on included accessories and their part codes of your machine, refer to the Quick…
The following are available as optional accessories to be purchased separately. Optional accessories differ depending on your model. For more optional…
Specifications differ depending on the machine model. For the functions available with your sewing machine model, refer to the table below. Refer to the Quick…
GETTING READY Basic operations B-9 B Turning the Machine On/Off WARNING • Use only regular household electricity for the power source. Using other power…
a Make sure that the machine is turned off (the main power switch is set to “ ”), and then plug the power cord into the power supply jack on the right side of…
When you are finished using the machine, turn it off. In addition, before transporting the machine to another location, be sure to turn it off. a Make sure…
When the power is turned on, the LCD comes on, and the following screen is displayed. The screen will vary slightly depending on your machine model. The screen…
Press to change various sewing machine operations and sewing settings. Press to move to previous/next pages. * You can also move to next pages by pressing .…
a Press . b Select (Language) display. c Use the “-” or “+” key to choose the desired language. d Press to return to the original screen
You can adjust the sensitivity of the operation keys to five levels. Display the settings screen to set desired level. 1 Operation keys a Press . b Select…
This section describes how to wind thread onto a bobbin. a Open the top cover. b Place the bobbin on the bobbin winder shaft so that the spring on the shaft…
→When threading the upper thread, carefully follow the instructions. a Turn on the machine. b Raise the presser foot lever to raise the presser foot. 1 Presser…
When making gathers or before free motion quilting, first pull up the bobbin thread as described below. a Refer to “Threading the upper thread” (page B-21) to…
With the twin needle, you can sew two parallel lines of the same stitch with two different threads. Both upper threads should have the same thickness and…
B-28 • Needles that can be used with this machine: Home sewing machine needles (size 65/9 - 100/16) * The larger the number, the larger the needle. As the…
GETTING READY Basic operations B-29 B Be sure to observe the following precautions concerning the handling of the needle. Failure to observe these precautions…
Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated. Before using the needle, place the flat side…
GETTING READY Basic operations B-31 B Replacing the presser foot a Press (Needle position button) once or twice to raise the needle. b Lower the presser foot.…
A stitch can be selected from the following methods available. Stitch patterns can be selected through either direct select (by pressing the designated key for…