Loading manual…
Loading manual…
General This manual introduces the installation, functions and operations of the network video decoder (hereinafter referred to as the "Device" or "Decoder").…
This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using…
For information on the installation requirements on the decoder, refer to the specifications of engineering and construction, and national standards. • The…
When you receive the Decoder, check whether there is any visible damage or not. The protective material of the device package can resist most accidental…
1.2.1 Front Panel 1.2.1.1 1-channel 4K High Definition Series and 4-channel 8K Ultrahigh Definition (with 2 input ports) Series Figure 1-1 Front panel Table…
2.1 Start Connect the Decoder to the power, and then press the power switch on the rear panel. The power indicator light turns on and the device starts
Connect the Decoder to the power, and then press the power switch on the rear panel. The power indicator light turns on and the device starts
Press and hold the power button on the front panel for 3 second to shut down the Decoder. If the power is cut off or the Decoder is forcibly shutdown while the…
The webpages in this chapter are for reference only and might differ depending on the model of the device
Procedure Step 1 Connect the network port of the Decoder to the network port of your computer with the network cable. Step 2 Set the computer and the Decoder…
Procedure Step 1 Enter the IP address of the Decoder in the browser address bar. Step 2 Set the password for the admin user. • The password must consist of…
Click the Screen tab. -channel 4K high definition series and 4-channel 8K ultrahigh definition series do not support local signals. Figure 3-4 Screen Table 3-1…
Mandatory actions to be taken for basic device network security: 1. Use Strong Passwords Please refer to the following suggestions to set passwords: • The…