Loading manual…
Loading manual…
General This manual introduces the installation, functions and operations of the 4&8-port unmanaged desktop switch (hereinafter referred to as "the Switch").…
This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using…
1.1 Introduction The Switch is a layer-2 commercial switch. It has a high-performance switching engine and a large buffer memory to ensure smooth video stream…
The Switch is a layer-2 commercial switch. It has a high-performance switching engine and a large buffer memory to ensure smooth video stream transmission.…
4/8 × 100/1000 Mbps Ethernet port. • Uplink Combo ports include electrical port and optical port. (Optical port is available on select models.) • All ports…
2.1 Front Panel The following figure is for reference only, and might differ from the actual product. Figure 2-1 Front panel (without optical ports) Following…
The following figure is for reference only, and might differ from the actual product. Figure 2-1 Front panel (without optical ports) Following are all the…
3.1 Preparation • Select an appropriate installation method. • Install the Switch on a solid and flat surface. • Leave around 10 cm of open space around the…
Select an appropriate installation method. • Install the Switch on a solid and flat surface. • Leave around 10 cm of open space around the Switch for heat…
The Switch supports desktop mount. You can directly place it on a solid and flat desktop
Some models support wall mount. Step 1 Drill two M4 screws into the wall. The distance between the screws needs to match that of the wall-mount holes of the…
4.1 Connecting GND GND cables do not come with the package of select models. Purchase them as needed. Grounding the Switch can protect it against lightning and…
GND cables do not come with the package of select models. Purchase them as needed. Grounding the Switch can protect it against lightning and interference. The…
Before connecting the power cord, make sure that the Switch is securely grounded. Step 1 Connect one end of the power cord to the power jack of the Switch.…
Step 1 We recommend wearing antistatic gloves, and then the anti-static wrist strap before installing SFP module. Make sure that the anti-static wrist strap…
The Ethernet port is a standard RJ-45 port. With its self-adaptation function, it can be automatically configured to full duplex/half-duplex operation mode. It…
You can directly connect the Switch PoE Ethernet port to the device PoE Ethernet port through network cable to achieve synchronized network connection and…
Cybersecurity Recommendations Mandatory actions to be taken for basic device network security: 1. Use Strong Passwords Please refer to the following…