ASUS VE228H user manual

Contents

1. Noticesp. 3

   Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This…

2. Safety informationp. 4

   Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to…

3. Care & Cleaningp. 5

   Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the…

4. Noticesp. 3
5. Safety informationp. 4
6. Care & Cleaningp. 5
7. 1.1 Welcome!p. 7

   2-1 ASUS VE228 Series LCD Monitor 2.1 Assembling the monitor base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2.…

8. 1.2 Package contentsp. 7
9. 1.3 Monitor introductionp. 8

   2-2 Chapter 2: Setup 2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this LCD monitor is specially designed for VESA wall mount.…

10. 1.3.1 Front viewp. 8
11. 1.3.2 Back viewp. 9

    2-3 ASUS VE228 Series LCD Monitor 2.4 Connecting the cables 1. Connect the cables as the following instructions: VGA Earphone jack HDMI Audio-in Audio-in…

12. 2.1 Assembling the monitor basep. 11

    To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Assemble the base and the arm by aligning the arrow marks on the base…

13. 2.2 Adjusting the monitorp. 11

    For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold…

14. 2.3 Detaching the arm/base (for VESA wall mount)p. 12
15. 2.4 Connecting the cablesp. 13

    1. Connect the cables as the following instructions: VGA Earphone jack HDMI Audio-in Audio-in VE228T VE228N VE228D VE228S VE228H VGA • To connect the audio…

16. 2.5 Turning on the monitorp. 14

    Gently press the power button . See page 1-3 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.

17. 3.1 OSD (On-Screen Display) menup. 15

    3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Press (or ), and to navigate through the functions. Highlight and activate the…

18. 3.1.1 How to reconfigurep. 15

    1. Press the MENU button to activate the OSD menu. 2. Press (or ), and to navigate through the functions. Highlight and activate the desired function by…

19. 3.1.2 OSD Function Introductionp. 15

    1. Spendid This function contains five sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your…

20. 3.2 Specifications summary (VE228H)p. 18

    Panel Type TFT LCD Panel size 21.5" (54.6 cm, 16:9) wide screen Max. Resolution 1920 x 1080 Pixel pitch 0.248 mm Brightness (Typ.) 250 cd/m2 Contrast Ratio…

21. 3.3 Troubleshooting (FAQ)p. 23

    Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to…

22. 3.4 Supported operating modesp. 24

    Resolution Frequency Horizontal Frequency Vertical Frequency (Hz) Pixel (MHz) 640x480 31.47(N) 59.94(N) 25.18 640x480 35.00(N) 66.66(N) 30.24 640x480 37.87(N)…