MSI Optix G273QF 27 inch IPS WQHD 1ms 165Hz G-SYNC Compatible Flat Gaming Monitor user manual

Contents

1. Getting Startedp. 3

   This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded…

2. Installing the Monitor Standp. 4

   1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the…

3. Adjusting the Monitorp. 6

   This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ ⚠Important •Avoid touching the display panel when adjusting the…

4. Monitor Overviewp. 8
5. Connecting the Monitor to PCp. 10

   1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the monitor power adapter & power cord. (Figure A) 4.…

6. OSD Setupp. 11

   This chapter provides you with essential information on OSD Setup. ⚠ ⚠Important All information is subject to change without prior notice

7. Navi Keyp. 11

   The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: •selecting function…

8. Hot Keyp. 11

   Users may enter into Game Mode, Screen Assistance, Alarm Clock and Input Source function menus by moving the Navi Key up, down, left or right when the OSD menu…

9. OSD Menusp. 12

   Gaming 1st Level Menu 2nd/3rd Level Menu Description Game Mode User •All items can be adjusted by users. •Use Up or Down Button to select and preview mode…

10. Gamingp. 12

    1st Level Menu 2nd/3rd Level Menu Description Game Mode User •All items can be adjusted by users. •Use Up or Down Button to select and preview mode effects.…

11. Professionalp. 14

    1st Level Menu 2nd Level Menu Description Pro Mode User •Default mode is User. •All items can be adjusted by users. •Use Up or Down Button to select and…

12. Imagep. 15

    Enhancement OFF •Image Enhancement enhances image edges to improve their acutance. •Users can adjust Image Enhancement in any mode. Weak Medium Strong…

13. Input Sourcep. 16

    1st Level Menu 2nd Level Menu Description HDMI1 •Users can adjust Input Source in any mode. HDMI2 DP Auto Scan OFF •Users can use the

14. Navi Keyp. 16

    to select Input Source at below status: • While “Auto Scan” is set to “OFF” with the monitor at power saving mode; • While “No Signal” message box is shown on…

15. Settingp. 17

    1st Level Menu 2nd Level Menu Description Language 繁體中文 •Language factory default is English. •Users have to press the OK Button to confirm and apply the…

16. Specificationsp. 19

    Model Optix G273QF Optix G273QPF Size 27 inch Curvature Flat Panel Type Rapid IPS Resolution 2560 x 1440 @165Hz Aspect Ratio 16:9 Brightness (nits) 300 (typ.)…

17. Preset Display Modesp. 21
18. Troubleshootingp. 22

    The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer…

19. Safety Instructionsp. 23

    Read the safety instructions carefully and thoroughly. •All cautions and warnings on the device or user’s manual should be noted. •Refer servicing to qualified…

20. TÜV Rheinland Certificationp. 24

    TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue…

21. Regulatory Noticesp. 25

    CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to…