Loading manual…
Loading manual…
Unauthorized reproduction of this document in part or in whole is prohibited. • The contents of this document are subject to change without notice. • Yamaha…
1.1 Applicable firmware revision This command reference applies to firmware Yamaha Intelligent L2 Switch SWX232x of Rev.2.05.07 / Rev.2.06.07. For the latest…
The SWX232x lets you perform command operations in the following two ways. Type of operation Method of operation Description Operation via console • Access…
3.1 Manage setting values The SWX232x uses the following configurations to manage its settings. Types of configuration Description User operations that can be…
4.1 Passwords 4.1.1 Set password for unnamed user [Syntax] password password no password [Parameter] password : Login password for unnamed user Single-type…
5.1 Interface basic settings 5.1.1 Set description [Syntax] description line no description [Parameter] line : Single-byte alphanumeric characters and…
6.1 FDB (Forwarding Data Base) 6.1.1 Set MAC address acquisition function [Syntax] mac-address-table learning enable mac-address-table learning disable no…
7.1 IPv4 address management 7.1.1 Set IPv4 address [Syntax] ip address ip_address/mask [secondary] [label textline] ip address ip_address netmask [secondary]…
8.1 IP multicast basic settings 8.1.1 Set processing method for unknown multicast frames [Syntax] l2-unknown-mcast mode [Parameter] mode : Sets the processing…
9.1 ACL 9.1.1 Generate IPv4 access list [Syntax] access-list ipv4-acl-id [seq_num] action protocol src-info [src-port] dst-info [dst-port] [ack] [fin] [psh]…
10.1 Local RADIUS server 10.1.1 Local RADIUS server function settings [Syntax] radius-server local enable [port] radius-server local disable no radius-server…