Loading manual…
Loading manual…
General The manual introduces the functions and operations of the web interface of the network speed dome and PTZ camera (hereinafter referred to as "the…
The manual will help you to use the Device properly. Read the manual carefully before using the Device, and keep it well for future reference. Operation…
Network Connection To view the web interface on your PC, connect the Device to the PC first. There are mainly two connection modes between the Device and PC.…
Click the Live tab, and the Live interface is displayed. See Figure 2-1. Live interface For descriptions of function bars on the Live interface, see Table 2-1.…
User’s Manual 11 Table 2-2 Encoding setting parameter description Parameter Description Main Stream It has large bit stream value and image with high…
User’s Manual 16 Video metadata System Menu To access an interface, click the corresponding tab on the system menu. For the system menu, see Figure 2-12.…
User’s Manual 19 Mark—managing comments PTZ Configuration You can control PTZ by using the PTZ Control panel or joystick. You can also set preset, scanning…
User’s Manual 23 OSD menu You can finish the following settings through the menu: Camera settings: See "5.1 Camera." PTZ settings: See "5.3 PTZ Settings."…
You can check the information of the detected human faces, human bodies, motor vehicles, and non-motor vehicles. This function is available on select models.…
User’s Manual 27 Statistics area of the detected targets Table 3-2 Statistics area description of the detected targets Icon Detected Target Description Face…
You can watch the saved pictures and videos on the Playback interface. Before using the function, you need to set the period, storage method, and record…
User’s Manual 35 Table 4-7 Progress bar time format description Parameter Description Click the button, and then the progress bar displays the recordings in…
Camera 5.1.1 Conditions Settings This section describes how to set camera attributes and manage profiles. 5.1.1.1 Conditions Picture Set camera attributes and…
User’s Manual 66 Parameter Description NR (Noise Reduction) Level Adjust the noise reduction level from 0 to 100. This parameter takes effect when noise filter…
User’s Manual 90 Parameter Description Custom Address If you have selected Custom, the address allocated by the server needs to be filled in. Click Save. PTZ…
User’s Manual 102 Default setting Click Default. The PTZ will be restored to factory defaults. Event Management 5.4.1 Video Detection Video detection includes…
User’s Manual 140 Storage 5.5.1 Schedule Before setting the schedule, make sure that the Record Mode is Auto in Record Control. If the Record Mode is Off, the…
User’s Manual 148 Table 5-45 Record control parameter description Parameter Description Pack Duration Set the pack duration of each recording file. It is 30…
User’s Manual 170 5.6.8 Upgrade Upgrade the system to improve device function and stability. If wrong upgrade file has been used, restart the Device; otherwise…
You can select alarm types on the interface. When the selected alarms are triggered, detailed alarm information will be displayed on the right side of the…
Click Logout to log out, and the login interface is displayed. See Figure 7-1. Enter the username and password to log in again. Login interface
User’s Manual 177 Cybersecurity Recommendations Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is connected to…