Loading manual…
Loading manual…
General This manual introduces the functions and operations of the alarm hub (hereinafter referred to as "the hub"). Safety Instructions The following…
The following description is the correct application of the device. Read the manual carefully before use to prevent danger and property loss. Strictly conform…
Alarm hub is a central device in the security system, which controls the operation of all connected accessories, including wireless keyfob, siren, door…
Check the package according to the following checklist. If you find anything damaged or lost, contact customer service. Figure 2-1 Checklist Table 2-1 Checklist…
3.1 Appearance Figure 3-1 Appearance Table 3-1 Structure No. Name Description 1 Indicator • Flashes green: The hub starts working. • Solid yellow: Configuring…
Figure 3-1 Appearance Table 3-1 Structure No. Name Description 1 Indicator • Flashes green: The hub starts working. • Solid yellow: Configuring network. • Solid…
The security system is configured and controlled through DMSS App. You can access to DMSS applications on iOS and Android. This section takes iOS as an…
Make sure that your phone has enabled Wi-Fi function
Step 1 Open DMSS App, and enter username and password to log in. Step 2 Scan QR code at the bottom of the hub. • On the Home interface, tap at the upper-right…
Make sure that your phone and the hub are connected to the same network. Step 1 Connect the Ethernet cables to the appropriate sockets. Step 2 Go through step…
You can add multiple accessories, including wireless keyfob, siren, door detector and PIR detector, into the hub. The section takes door detector as an…
Prior to installation, insert the SIM card or the network cable, connect to the power supply and turn on the hub switch, and make sure that you have completed…
On the Hub interface, tap , and then you can view and edit general information of the hub. Table 8-1 Parameter description Parameter Description Device…
". Time Zone Tap to select your time zone, and enable DST (daylight saving time) if necessary. • Time zone: Select the time zone in which the hub operates. •…
On the Hub interface, select > Hub Status to view the hub status.
After the accessories have been added to the hub, you can arm and disarm them. Only wireless door detector and PIR detector can be armed
There are three types of arming modes. • Home: Enable the home mode, and then the selected accessories under the hub will be armed. Make sure that home mode…
You can arm and disarm the detectors in a single area or all the areas through manual or scheduled operations. • Single Arming and Disarming: Arm and disarm…
Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is connected to the internet. IP video surveillance is not immune…