Loading manual…
Loading manual…
Basic functions Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3) 1 All running apps will close. 2 You can…
Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3) 1 All running apps will close. 2 You can access and adjust…
* Image shown may differ from your Signage
(Depending upon model) • Select the Language and Country. Some countries need to select the Time Zone.
The abundant functions for Signage linked with software installation can be projected on OSD as ‘Installation Menu’. The wide range of features can be…
When ‘Public Display Settings’ is set to On (Work), all functions of Public Display Mode apply. Public Display Settings • Decide to work all functions of…
MAC Address • Displays the MAC address (not customizable). Network Setting One-click network connection • Connects easily to a wired network. • This menu…
Configuration Setup On Timer Operation • It is a mode to select ‘Timer Power On’ working one time or repeatedly. • 'Once': ‘Timer Power On’ in the user menu…
You can update files from USB to Signage through the Signage manager.
This feature is not available for all models. Code (Hex) Function Note 08 (POWER) Remote control Button (Power On/Off) C4 Remote control Button C5 Remote…
* Image shown may differ from your signage. * Cable is not provided. * The connection interface may differ from your Signage
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s…
DE9 (D-Sub 9pin) Type (PC) RS-232C IN (CONTROL & SERVICE) (TV) (Signage) • You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C…
For Set ID number, see “Real data mapping (Hexadecimal : Decimal)”. Press to access the main menus. Press the Navigation buttons to scroll to (* [General] [Set…
Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable
(Depending upon model) COMMAND1 COMMAND2 DATA (Hexadecimal) 1 Power k a 00 to 01 2 [Aspect Ratio] k c (page 30) 3 Screen Mute k d (page 30) 4 Volume Mute k e…
* (Depending upon Model) Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the signage. (j, k, m or x) [Command…