Loading manual…
Loading manual…
General This manual introduces the installation and operation of network camera. Read carefully before using the device, and keep the manual safe for future…
This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using…
1.1 Cable Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and water damage. For the detailed operation, see FAQ…
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and water damage. For the detailed operation, see FAQ manual.…
The camera can connect to external alarm input/output devices through digital input/output. Alarm input/output is available on select models. Step 1 Connect…
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more information, see web operation manual. • Device…
Step 1 Search for the device that needs to be initialized through ConfigTool. 1. Double-click ConfigTool.exe to open the tool. 2. Click Modify IP. 3. Select…
You can change the IP address of one or more devices at a time. This section is based on changing IP addresses in batches. • Changing IP addresses in batches…
Step 1 Open IE browser, enter the IP address of the device in the address bar, and then press the Enter key. If the setup wizard is displayed, finish the…
3.1 Packing List • The tool required for the installation such as electric drill is not provided in the package. • The operation manual and related tool…
The tool required for the installation such as electric drill is not provided in the package. • The operation manual and related tool information are contained…
Figure 3-2 Dimensions: Model A (mm [inch]) Figure 3-3 Dimensions: Model B (mm [inch]) Figure 3-4 Dimensions: Model C (mm [inch])
3.3.1 Installation Method Figure 3-5 Installation method 3.3.2 Installing SD Card • SD card slot is available on select models. • Disconnect the power before…