Loading manual…
Loading manual…
Hardware Installation Guide
| 6 1 1. Introduction Congratulations on the purchase of your NETGEAR® ProSafeTM GS728TS, GS728TPS, GS752TS, or GS752TPS Smart Switch! Your Smart Switch is a…
The NETGEAR GS728TS, GS728TPS, GS752TS, or GS752TPS Smart Switch provides either 24 (GS728TS and GS728TPS) or 48 (GS752TS and GS752TPS) twisted-pair ports that…
for the observation, configuration, and control of the network. With a Web-based Graphical User Interface (GUI), the switch’s many capabilities can be viewed…
| 12 2 2. Physical Description This chapter describes the GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch hardware features. Topics include
GS728TPS Front-Panel and Back-Panel Configuration • GS752TS Front-Panel and Back-Panel Configuration • GS752TPS Front-Panel and Back-Panel Configuration • LED…
The GS728TPS Smart Switch has 24 10/100/1000 Mbps PoE capable copper ports and 6 SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (port 27 and…
The GS752TS Smart Switch has 48 10/100/1000 Mbps copper ports and 6 SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (port 51 and 52) at a time…
The GS752TPS Smart Switch has 48 10/100/1000 Mbps PoE capable copper ports and 6 SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (port 51 and…
RJ-45 Port LEDs The following table describes the RJ-45 port LED designations. There is one LED for each RJ-45 port. LED Designation Ethernet Mode…
RJ-45 Ports RJ-45 ports are autosensing ports. When inserting a cable into an RJ-45 port, the switch automatically detects the maximum speed (10, 100, or 1000…
| 22 3 3. Applications Your GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch is designed to provide flexibility in configuring your network connections.…
The Smart Switch can be used as a desktop switch to build a small network that enables users to have 1000 Mbps access to a file server. With full-duplex…
You can use the GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch as a backbone switch in a small network that gives users high-speed access to servers and…
| 24 4 4. Installation This chapter describes the installation procedures for your GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch. Switch installation…
Before you install the switch, ensure the operating environment meets the site requirements in the following table. Characteristics Requirements Mounting •…
The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch can be used on a flat surface or mounted in a standard network equipment rack. Installing the Switch…
Before applying power to the switch, perform the following steps: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly. • Check…
The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch contains Auto…
The following procedure describes how to install an optional SFP transceiver module into one of the SFP ports of the switch. Note: Contact your NETGEAR sales…
A master-backup unit runs as a slave unit as described above. In addition, it continuously monitors the existence and operation of the stack master. If the…
The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch does not have an ON/OFF switch. Power is controlled by the power cord connection. Before connecting…
The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch contains software for viewing, changing, and monitoring the way it works. This management software is…
This chapter provides information about troubleshooting the NETGEAR Smart Switch. Topics include the following
Additional Troubleshooting Suggestions Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. Symptom Cause…
If the suggestions in Troubleshooting Chart do not resolve the problem, refer to the troubleshooting suggestions in this section. Network Adapter Cards Ensure…
Network Protocol and Standards Compatibility IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x full-duplex…
NETGEAR Wired Products Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws…