Loading manual…
Loading manual…
I Foreword General This user’s manual (hereinafter referred to be "the Manual") introduces the functions, installation, and operations of the camera. Safety…
III Important Safeguards and Warnings Electrical Safety All installation and operation should conform to your local electrical safety codes. The power…
V Regulatory Information FCC Information Changes or modifications not expressly approved by the party responsible for compliance could void the user's…
General 1.1 This series of products comply with the HDCVI standard and support the transmission of video and control signal over coaxial cable. They produce…
Dimension 2.1 Model A (1) (mm [in.]) Figure 2-1 Model A (2) (mm [in.]) Figure 2-2 Model B (mm [in.]) Figure 2-3 Model C (mm [in.]) Figure 2-4 Model D (mm…
type might vary with different cameras, and the actual product shall prevail.
Make sure the mounting surface is strong enough to hold at least three times of the camera weight. The following figures are for reference only, and the actual…
Installation 7 Model A (1) and Model A (2) adjustment Figure 3-2 2) In the PTZ setting interface (Figure 4-5), click + or – at Zoom and Focus to adjust the…
Installation 8 No. Item No. Item ③ Expansion bolt ④ Mounting surface Confirm the position of screw holes (and the cable outlet hole if it needs to go through…
Installation 9 Connect the device① to power source and the XVR device, and the live view screen is Step 3 displayed. Loosen the locking screws and aim the lens…
Installation 10 Model D adjustment Figure 3-9 Installing Model E 3.5 Model E installation Figure 3-10 Table 3-5 Installation item list No. Item No. Item ①…
Installation 11 Installing Model F 3.6 Model F installation Figure 3-12 Table 3-6 Installation item list No. Item No. Item ① Device ② Self-tapping screw ③…
Installation 12 Installing Model G 3.7 Model G installation Figure 3-14 Table 3-7 Installation item list No. Item No. Item ① Device ② Self-tapping screw ③…
Installation 13 Installing Model H 3.8 Model H installation Figure 3-16 Table 3-8 Installation item list No. Item No. Item ① Device ② Self-tapping screw ③…
Installation 14 Installing Model I (1) and Model I (2) 3.9 Model I (1) and Model I (2) installation Figure 3-18 Table 3-9 Installation item list No. Item No.…
Installation 15 4) Open the bottom cover, and then twist to loosen the zoom and focus levers, turn them left or right to adjust the focus and zoom until you…
Installation 16 Model J adjustment Figure 3-22 Installing Model K (1) and Model K (2) 3.11 Model K (1) and Model K (2) installation Figure 3-23 Table 3-11…
Installation 17 Model K (1) and Model K (2) adjustment Figure 3-24 2) In the PTZ setting interface (Figure 4-5), click + or – at Zoom and Focus to adjust the…
Power up the camera and connect it to the XVR device with coaxial cable, and then the live view screen is displayed. The following instructions will guide you…
General Configuration 20 Main menu interface Figure 4-2 Right-click anywhere on the screen to return to the previous interface until it goes back to the live…
General Configuration 21 In the Main Stream column, click More Setting. Step 3 The More Setting interface is displayed, see Figure 4-4. More setting interface…
In order to maintain the image quality and proper functioning of the device, please read the following maintenance instructions carefully and hold rigid…