Loading manual…
GE JV327XWH user manual
- Type
- User manual
- Language
- English
- Pages
- 12
- Category
- Cooker hoods
- Models
- JN327JV327JV327XCTJV327XWHJV337JV337XCTJV347
Open PDFOpens the file on images.salsify.com.
Contents
- Important Safety Informationp. 1
- If You Need Servicep. 2
… • Do not attempt to repair or replace any part of your hood unless it is specifically recommended in this book. All other servicing should be referred to a…
- To Operatep. 3
Lamp Switch Models: JN327, JV327, JV337 Press for OFF and ON. Lamp Switch Model: JV347 Rotate clockwise, first position for NIGHT LIGHT, second position for…
- Care and Cleaningp. 3
Replaceable Charcoal Filter—Used in non-ducted installations only. Models: JN327, JV347—non-ducted installations only The charcoal filter cannot be cleaned. It…
- Replacable Charcoal Filterp. 3
- Reusable Metal Grease Filterp. 3
—Used in ducted installations only. Models: JV327, JV337, JV347—ducted installations only The efficiency of your hood depends on a clean filter. Frequency of…
- Motor and Fanp. 3
- Installation Instructions for GE Hoodp. 4
- Preparationp. 5
OF WALL CABINET AND WALL NOTE: For easier installation make all hood and vent cutouts in the cabinet and wall before cabinet is permanently fastened in place.…
- Duct Installationp. 5
Model JV327 See Figs. 4 & 9 The hood has been designed to mate with a standard 7″ round duct. (A round damper kit may be ordered. Order GE model number…
- Power Supplyp. 7
A. CIRCUIT VOLTAGE: This hood must be connected to a supply circuit of the proper voltage and frequency as specified on the rating plate. Wire size must…
- Hood Installationp. 7
A. MECHANICAL NOTE: When possible, it is more convenient to mount and wire the hood before the base cabinet is put in place. 1. Take out 1 screw and remove the…
- Electrical Connectionp. 8
1. Be sure the power supply is disconnected before making electrical connections. 2. Remove the connection box cover located on the left side of the fan unit.…
- Lamp Replacementp. 9
Model JV347 has a lamp cover. The lamp cover need not be removed for lamp removal or installation. Remove the lamp and replace with an ordinary screwbase lamp…
- Questions? Use This Problem Solverp. 10
- Model and Serial Number Locationp. 11
Help Us Help You… Write down the model and serial numbers. You’ll find them on a label on the back wall of the hood. These numbers are also on the Consumer…
- If You Need Servicep. 11
To obtain service, see your warranty on the back page of this guide. We’re proud of our service and want you to be pleased. If for some reason you are not…
- Warrantyp. 12
For one year from date of original purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood…