Loading manual…
Loading manual…
EN Owner’s Manual PRECAUTIONS pages 4 to 5 Setup pages 7 to 9 Troubleshooting pages 40 to 41
PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed…
Main features D-PRE (Discrete Class-A MIC preamp) Mono input channels are equipped with Class-A discrete microphone preamplifiers. The head amplifier features…
Preparing the power supply 1. Make sure that the power switch of the unit is set to the “ ” position (off). 2. Connect the socket of the included power cord to…
Top panel Mono input section (page 11) Stereo input section (page 11) USB device recorder section (page 15) Display section (page 16) iPod/iPhone section (page…
This chapter explains the basic operations about how to view the display and operate the screen. Viewing the display The display indicates the various…
The MGP32X/MGP24X features two built-in effects; FX1 and FX2. FX1 has REV-X reverb (8 types), while FX2 has SPX multi effects (a total of 16 types, including…
About the graphic EQ (GEQ) Graphic EQ processing is inserted into the STEREO bus (L/R). You can select the 14bandGEQ or the Flex9GEQ. The Flex9GEQ lets you…
About the master compressor The MGP32X/MGP24X features two master compressors: Comp and Multiband. The Comp type has a simple single band, while the Multiband…
About USB device recording/playing back The MGP32X/MGP24X features an internal USB device recorder function that lets you record the output from the STE- REO…
Applying the Low Pass Filter (LPF) A Low Pass Filter (LPF) can be applied to the signal output from the STEREO bus L/R to the MONO OUT connector. LPF is…
Power doesn’t come on. Is an independent power-supply unit such as a power generator, or a power strip with switch plugged into the mixer? Make sure that the…
Message List MESSAGE WARNING This warning screen appears when an inappropriate device is connected to the USB connector, or when an operation results in an…