Loading manual…
Loading manual…
General This manual introduces basic operations of the master station. Safety Instructions The following categorized signal words with defined meaning might…
The following description is the correct application method of the master station. Read the manual carefully before use, in order to prevent danger and…
Introduction 1.1 You can have two-way video call with indoor monitors (VTH), door stations (VTO), and fence stations. You can watch videos captured by IP…
Use the power adapter that came in the box with the master station Do not use other power adapters. Before turning on the VTS, make sure that all cables…
Initialization 3.1 For the first time use, you need to set password and email. The password is used to enter the Advance Login interface. Initialization Figure…
Login Figure 3-2 Resetting Password 3.3 If you forget the password for logging in to the Advanced Login interface, you can rest the password through the email…
Tap OK. Step 6 The password is reset. Local Settings 3.4 You can set device No., IP address, subnet mask, and gateway by selecting Config > Advance Config >…
Tap VTO. Step 2 Tap Add. Step 3 Tap Batch Add. Step 4 Add door stations (VTO) in batches Figure 3-8 Enter starting IP, ending IP, username, and password. Step…
Setting SIP server Figure 3-9 Set parameters. Step 2 Table 3-1 Setting SIP server Parameter Description SIP Server IP Enter the SIP server IP address. Port…
Adding IP cameras Figure 3-10 Configure parameters. Step 2 Table 3-2 Adding IP cameras Parameter Description IPC Name Enter the name of the IP camera. IP…
Resetting password Figure 3-11 Tap OK. Step 4 Debug 3.9 The debug function is only for engineers. Select Config > Advance Config > Debug. Step 1 Tap OFF to…
Watching Monitoring Videos 4.1 You can watch videos captured by IP cameras, door stations, and fence stations that are connected to the VTS. When watching…
Table 4-1 Descriptions of watching monitoring videos Parameter Description Call Press the Shout button to start a call with the door station (VTO). Last…
Call records Figure 4-7 Tap a call record to view details. Step 2 You can tap to clear all records. Tap or to view record or snapshot details Message 4.3…
Select Video, and then tap to view recorded videos. Select Picture, and then tap to view snapshots. Table 4-3 Details of the message interface Icon…
Basic Config 4.6 You can set VTS display, ring, SD card and call duration on the Config interface. 4.6.1 Display You can adjust screen brightness and screen…
Cybersecurity Recommendations Appendix 1 Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is connected to the…