Loading manual…
Loading manual…
To fulfill possible future product needs, and to receive additional product information as it becomes available, please visit your region section on…
” section. Your display serial number is located on the rear side of the display. For additional information, please see the “Customer Support” section in this…
1. Connect video cable • Make sure both the display and computer are turned OFF. • Remove rear panel covers if necessary. • Connect the video cable from the…
NOTE: For use only with a UL Listed Wall Mount Bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer. Refer…
is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and…
OSD Lock: Press and hold [1] and the up arrow ▲ for 10 seconds. If any other buttons are pressed the message OSD Locked will display for 3 seconds. • OSD…
Use the buttons on the front control panel to display and adjust the on-screen OSD control settings. Standby Power On/Off Power light Blue = ON Amber = Power…
Navigate through menu items by using the up/down ▲/▼ buttons. NOTE: Check the Main Menu items on your display OSD and refer to
below. Main Menu Explanation NOTE: The Main Menu items listed in this section indicate whole Main Menu items on all models. For the actual Main Menu details…
This product will enter into Sleep/Off mode and reduce power consumption within 5 minutes of no signal input.
Display Type Display Size Color Filter Glass Surface TFT (Thin Film Transistor), Active Matrix 1920 x 1080 Display, 0.2715 mm pixel pitch Metric: 60 cm…
No power • Make sure the power button (or switch) is ON. • Make sure A/C power cord is securely connected to the display. • Plug another electrical device into…
For technical support or product service, see the table below or contact your reseller. NOTE: You will need to provide the product serial number.…
ViewSonic® Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the…