TP-Link 16-Port 10/100Mbps Rackmount Network Switch (TL-SF1016) installation instructions

Contents

1. Chapter 1 Introductionp. 5

   1.1 Product Overview The Unmanaged/Easy Smart Switch provides you with a low-cost, easy-to-use, high-performance, seamless, and standard upgrade to improve…

2. 1.1 Product Overviewp. 5

   The Unmanaged/Easy Smart Switch provides you with a low-cost, easy-to-use, high-performance, seamless, and standard upgrade to improve your network to 100 Mbps…

3. 1.2 Appearancep. 5
4. Chapter 2 Installationp. 13

   2.1 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, contact your distributor. One…

5. 2.1 Package Contentsp. 13

   Make sure that the package contains the following items. If any of the listed items is damaged or missing, contact your distributor. One Switch One Resource CD…

6. 2.2 Safety Precautionsp. 13

   To avoid any device damage and bodily injury caused by improper use, you should observe the following rules. • • Safety Precautions • •Keep the power off…

7. 2.3 Installation Toolsp. 15

   Phillips screwdriver • •ESD-preventive wrist wrap • •Cables Note: These tools are not included with our product. If needed, you can purchase them separately

8. 2.4 Product Installationp. 15

   Desktop Installation To install the device on the desktop, follow the steps:

9. Chapter 3 Connectionp. 17

   3.1 Ethernet Port Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 3-1 Connecting the RJ45 Port RJ45…

10. 3.1 Ethernet Portp. 17

    Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 3-1 Connecting the RJ45 Port RJ45 Port RJ45 Cable

11. 3.2 SFP Portp. 17

    The following figure demonstrates the connection of SFP port to an SFP module. Figure 3-2 Inserting the SFP Module SFP Slot SFP Module Note…

12. 3.3 Verify Installationp. 17

    After completing the installation, verify the following items: • •There should be 5 to 10 cm of clearance around the device for ventilation and make sure the…

13. 3.4 Power Onp. 18

    Plug the negative connector of the provided power cord into the power socket of the device and plug the positive connector into a power outlet as the following…

14. 3.5 Initializationp. 18

    After the device is powered on, it begins the Power-On Self-Test. A series of tests run automatically to ensure the device functions properly. During this…

15. 3.6 Accessing the Switchp. 18

    Note: Only for TL-SG1016DE/TL-SG1016PE/TL-SG1024DE/TL-SG1218MPE/TL-SG1428PE, you can access and manage the switch. After the initialization finished, you can…

16. Appendix A Troubleshootingp. 20

    Unmanaged/Easy Smart Rackmountable Switches Appendix A Troubleshooting Q1. What could I do if I forgot the username and password of the Switch? With the switch…

17. Appendix B Specificationsp. 21

    Unmanaged/Easy Smart Rackmountable Switches Appendix B Specifications Item Content Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x IEEE 802.3ab (except…