Loading manual…
Loading manual…
The motherboard/system contain numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).…
CPU AMD EPYC™ 7002 series processor family Single processor, 7nm, Socket SP3 Up to 64-core, 128 threads per processor TDP up to 225W Compatible…
L1 L2 2 4 6 8 1 3 5 7 No. Name Color Status Description 1. Reset Button -- -- Press the button to reset the system. 2. NMI button -- -- Press the button server…
No. Name Color Status Description 1. 1GbE Speed LED Yellow On 1 Gbps data rate Green On 100 Mbps data rate N/A Off 10 Mbps data rate 2. 1GbE Link/ Activity LED…
PSU LED State Description OFF Indicates no AC power to all power supplies 0.5Hz Blink GREEN Indicates AC present/ only standby on/ Cold redundant mode 2Hz…
/(' /(' RAID SKU HDD Fault Locate HDD Access HDD Present (No Access) No RAID configuration (via HBA) RAID configuration (via HW RAID Card or SW RAID Card)…
Before you remove or install the system cover • Make sure the system is not turned on or connected to AC power. Follow these instructions to remove the chassis…
Follow these instructions to remove/install the fan duct: 1. Lift up to remove the two fan ducts 2. To install the fan duct, align the fan duct with the…
Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug…
3-5-1 Eight Channel Memory Configuration This motherboard provides 8 DDR4 memory sockets and supports Eight Channel Technology. After the memory is installed…
WARNING: Installation of the thermal pad over the M.2 device is required when installing an M.2 device. Lack of the thermal pad may result in system overheat…
Follow these instructions to replace the fan assembly: 1. Lift up the fan assembly from the chassis. 2. Reverse the previous steps to install the replacement…
Follow these instructions to replace the power supply: 1. Press the retaining clip on the right side of the power supply along the direction of the arrow. 2.…
Chapter 4 Motherboard Components 4-1 Motherboard Components Item Description 1 USB 3.0 Port x 2 2 ID LED 3 IPMB Connector 4 VGA Port 5 Serial Port Cable…
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept…
The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press [Enter] to access the…
Parameter Description USB Configuration USB Controller Displays the supported USB controllers. USB Devices: Displays the USB devices connected to the system.…
displays submenu options for configuring the CPU-related information that the BIOS automatically sets. Select a submenu item, then press [Enter] to access the…
displays submenu options for configuring the function of AMD PBS. Select a submenu item, then press [Enter] to access the related submenu screen. Parameter…
displays submenu options for configuring the function of the North Bridge. Select a submenu item, then press [Enter] to access the related submenu screen.…
(Note) Advanced items prompt when OS Watchdog Timer is set to Enabled. Parameter Description FRB-2 Timer Enable/Disable FRB-2 timer (POST timer). Options…
Parameter Description BMC network configuration Lan Channel 1 Configuration Address source Select to configure LAN channel parameters statically or dynamically…
The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that…
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not…