Loading manual…
Loading manual…
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This…
Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to…
Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the…
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for…
Thank you for purchasing the ASUS ® OLED monitor! The latest widescreen OLED monitor from ASUS provides a broader, brighter and crystal-clear display, plus a…
Check your package for the following items: OLED monitor Monitor stand/base Short stand Quick start guide Warranty card Power cord Ultra High Speed HDMI cable…
1.3.1 Front view 3 2 1 5 6 7 8 9 10 4 1. Proximity sensor • When enabled, this feature will automatically reduce brightness periodically if the system does not…
2 1 5 6 7 8 9 10 4 1. Proximity sensor • When enabled, this feature will automatically reduce brightness periodically if the system does not detect an object…
HDR The monitor supports HDR format. When detecting HDR content, an "HDR ON" message will pop up and display in the Information page. • Daisy chaining The…
The Self Calibration could be triggered by monitor OSD and ProArt Calibration Software. Ensure the protective film on the color sensor has been removed before…
To remove the short stand, follow these steps: 1. Press and hold the quick release button located on one side of the short stand. 2. Remove the short stand…
To assemble the monitor arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes. 3. Secure the hinge…
The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a…
To install the hood: 1. Remove the tapes that holds it in place and open the hood. 2. Adjust the upper side of the hood to your desired length by extending or…
You can use cable clips to organize your connected cables. To install the cable clips: 1. Insert the clips as shown in the illustration. 2. Press down on the…
For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold…
Connect the cables as the following instructions: • To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the…
Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.
3.1.1 How to reconfigure 1. Press any button (except the Power button) to display the button functions menu. 2. Press the Menu (5-way) button to activate the…
1. Press any button (except the Power button) to display the button functions menu. 2. Press the Menu (5-way) button to activate the OSD menu. 3. Move the Menu…
1. Preset Preset mode was calibrated in factory side to ensure the configuration of each mode could meet industry standard. • Native: Present the original…
Panel Type OLED Panel size 26.5” (16:9) wide screen Max. Resolution 3840 x 2160 Pixel pitch 0.153 mm x 0.153 mm Brightness SDR 250 nits (Typ.), HDR 1000 nits…
Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to…
Resolution Frequency Vertical Frequency (Hz) 640 x 480 60Hz 640 x 480 75Hz 800 x 600 60Hz 800 x 600 75Hz 1024 x 768 60Hz 1024 x 768 75Hz 1280 x 1024 60Hz 1280…