ViewSonic PA500S user manual

Contents

1. Important safety instructionsp. 7

   Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product…

2. Introductionp. 9

   Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use.…

3. Positioning your projectorp. 14

   Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position…

4. Connectionp. 18

   When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for…

5. Operationp. 22

   Starting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). 2. Press Power to…

6. Maintenancep. 48

   Care of the projector You need to keep the lens and/or filter (optional accessory) clean on a regular basis. Never remove any parts of the projector. Contact…

7. Troubleshootingp. 53

   The projector does not turn on. No picture Blurred image Remote control does not work Cause Remedy There is no power from the power cord. Plug the power cord…

8. Specificationsp. 54

   Dimensions 294 mm (W) x 110 mm (H) x 218 mm (D) (Excluding extrusions) Ceiling mount installation 218 110 294 Unit: mm 61 199 Ceiling mount screws: M4 x 8…

9. Copyright informationp. 71

   Copyright Copyright © 2017. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or…