Loading manual…
Netgear GSM4248P (GSM4248P-100EUS) installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 61
- Category
- Network switches
- Models
- GSM4212PGSM4230PGSM4230UPGSM4248PGSM4248P-100EUSGSM4248PX-100EUSGSM4248UXMSM4214XXSM4216F
Open PDFOpens the file on objects.icecat.biz.
Contents
- 1. Introductionp. 5
Introduction The NETGEAR AV Line of Fully Managed Switches M4250 Series consists of high-performance, IEEE-compliant, professional audio-video switches for…
- Overviewp. 6
This installation guide is for the following NETGEAR AV Line of Fully Managed Switches M4250 Series models: • 8-port PoE+ and PoE++ models: - M4250-10G2F-PoE+…
- Featuresp. 7
The switch supports the following key hardware features: • PoE+ and PoE++ models with switch ports in various configurations depending on the model: - 8, 24…
- Safety instructions and warningsp. 9
Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. To reduce the risk of bodily…
- 2. Hardware Overviewp. 12
Hardware Overview This chapter describes the switch hardware features. The chapter includes the following sections: • Hardware descriptions of the 8-port PoE+…
- Hardware descriptions of the 8-port PoE+ and PoE++ modelsp. 13
This section describes the switch hardware features for the following 8-port PoE+ and PoE++ models: • Model M4250-10G2F-PoE+ (SKU GSM4212P) - Eight PoE+…
- Hardware descriptions of the 24-port PoE+ and PoE++ modelsp. 18
- Hardware descriptions of the 40-port PoE+ and PoE++ modelsp. 23
- Hardware descriptions of the LED tiles model with 2.5 Gbps portsp. 28
This section describes the switch hardware features for model M4250-12M2XF (SKU MSM4214X). Front panel of the LED tiles model The following figure illustrates…
- Hardware descriptions of the aggregation model with multiple 10G SFP+ fiber portsp. 30
- Switch hardware interfacesp. 33
This section describes the hardware interfaces that are common to the M4250 series switch models. 1GBASE-T RJ-45 and 2.5GBASE-T RJ-45 copper ports All 1GBASE-T…
- Fansp. 38
The switch includes internal fans that support intelligent operation, which enables the switch to automatically start the operation of the fans, gradually…
- 3. Installationp. 47
Installation This chapter describes the installation procedures for the switch. Switch installation involves the steps that are described in the following…
- Step 1: Prepare the sitep. 48
Before you install the switch, make sure that the operating environment meets the site requirements that are listed in the following table. Table 17. Site…
- Step 2: Protect against electrostatic dischargep. 49
WARNING: Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you…
- Step 3: Unpack the switchp. 49
The following figure shows the package contents for the switch. The figure shows the contents for model M4250-10G2XF-PoE++, but the contents for all models are…
- Step 4: Mount or place the switchp. 51
You can mount the switch in a standard 19-inch (48.26-centimeter) network equipment rack or place the switch on a flat surface. Mount the switch in a rack To…
- Optional Step 5: Install SFP or SFP+ transceiver modulesp. 53
This procedure is optional. The following table shows the models and the ports that can support SFP or SFP+ modules. Table 18. SFP or SFP+ ports Port Numbers…
- Step 6: Connect devices to the switchp. 54
WARNING: This switch is designed for indoor use only. If you want to connect it to a device located outdoors, the outdoor device must be properly grounded and…
- Step 7: Check the installationp. 55
Before you apply power to the switch, perform the steps that are described in this section. To check the installation: 1. Inspect the equipment thoroughly. 2.…
- Step 8: Apply AC power and check the LEDsp. 55
The switch provides an On/Off power switch that controls the power. Before connecting the power cable or cables, select an AC outlet that is not controlled by…
- Optional Step 9: Connect a console to the switchp. 56
This procedure is optional. You can configure and manage the switch through the main local browser interface or the audio-video user interface. If you want to…
- 4. Troubleshootingp. 58
Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE…
- Troubleshooting chartp. 59
The following table lists symptoms, causes, and solutions for possible problems. Table 19. Troubleshooting chart Solution Cause Symptom Check the power cable…
- PoE troubleshooting suggestionsp. 60
Here are some tips for correcting PoE problems that might occur: • Make sure that the system POE LED is off. If the system POE LED is solid yellow, disconnect…
- Additional troubleshooting suggestionsp. 61
If the suggestions in the troubleshooting chart do not resolve the problem, see the following troubleshooting suggestions: • Network adapter cards: Make sure…