Gigabyte MC62-G40 (9MC62G40NR-00) user manual

Contents

1. MC62-G40 Motherboard Layoutp. 5
2. Block Diagramp. 7
3. Chapter 1 Hardware Installationp. 8
4. 1-1 Installation Precautionsp. 8

   The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to…

5. 1-2 Product Specificationsp. 9

   Form Factor Š CEB Š 305W x 267D (mm) CPU Š AMD Ryzen™ Threadripper™ Pro 3000WX processors Š Processor up to 64-core, 128 threads; TDP up to 280W Chipset Š AMD…

6. 1-3 Installing and Removing the CPU and Heat Sinkp. 11

   Follow these instructions to Install the CPU: 1. Loosen the three captive screws in sequential order (1g2g3) securing the CPU cover. 2. Flip open the CPU…

7. 1-4 Installing and Removing Memoryp. 12

   Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of…

8. 1-5 Installing and Removing the M.2 SSD Modulep. 14

   Follow the steps below to install an optional M.2 SSD module on your motherboard. Step1. Insert the M.2 SSD module into the slot. Step2. Secure it with the…

9. 1-6 Installing and Removing the M.2 WiFi Modulep. 14
10. 1-7 Back Panel Connectorsp. 15

    VGA Port Connect to a monitor device. 2 ID button with LED When the system identification is active, the ID LED on the front/ back panel glows blue. 3 USB 3.2…

11. 1-8 Internal Connectorsp. 17

    Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •…

12. 1-9 Jumper Settingsp. 25

    Jumper Name Jumper Setting Clear CMOS 1-2: Normal operation. (Default) 2-3: Clear CMOS data. S3 Power On Select 1-2: Keep initial power on. (Default) 2-3: Stop…

13. Chapter 2 BIOS Setupp. 26

    BIOS flashing is potentially risky, if you do not encounter any problems when using the current BIOS version, it is recommended that you don't flash the BIOS.…

14. 2-1 The Main Menup. 28

    Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept…

15. 2-2 Advanced Menup. 31

    The Advanced Menu displays submenu options for configuring the function of various hardware components. Select a submenu item, then press <Enter> to access the…

16. 2-3 AMD CBS Menup. 60

    AMD CBS menu displays submenu options for configuring the CPU-related information that the BIOS automatically sets. Select a submenu item, then press [Enter]…

17. 2-4 AMD PBS Menup. 81

    AMD PBS Option menu displays submenu options for configuring the function of AMD PBS. Select a submenu item, then press [Enter] to access the related submenu…

18. 2-5 Chipset Setup Menup. 84

    Chipset Setup menu displays submenu options for configuring the function of the North Bridge. Select a submenu item, then press <Enter> to access the related…

19. 2-6 Server Management Menup. 86

    Parameter Description FRB-2 Timer Enable/Disable FRB-2 timer (POST timer). Options available: Enabled, Disabled. Default setting is Disabled. FRB-2…

20. 2-7 Security Menup. 93

    The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that…

21. 2-8 Boot Menup. 96

    The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not…

22. 2-9 Save & Exit Menup. 98

    The Save & Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press <Enter>. Parameter Description Save…

23. 2-10 BIOS Recoveryp. 99

    The system has an embedded recovery technique. In the event that the BIOS becomes corrupt the boot block can be used to restore the BIOS to a working state. To…

24. 2-11 BIOS POST Beep code (AMI standard)p. 100

    2-11-1 PEI Beep Codes # of Beeps Description 1 Memory not Installed. 1 Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) 2…