Loading manual…
Loading manual…
Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a…
WARNING • Keep away from heat sources like electrical heaters. -- Electrical shock, fire, malfunction, or deformation may occur. • Keep the packing…
WARNING • If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately and contact…
WARNING • Make sure to turn off the product. -- You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the…
WARNING • Do not disassemble, repair or modify the product at your own discretion. -- Fire or electric shock accident can occur. -- Contact the service center…
Do NOT install this product by yourself as you may injure yourself or cause damage to product. Please contact service personnel authorised by manufacturer.
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface…
CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of…
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations…
The image may be different according to the model. Buttons • : Changes the input source. • : Accesses the main menus, or saves your input and exits the menus.…
When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen)
Make sure that the protection pads are removed from each corner before installing the product. NOTE • Keep the removed protection pads and use them when moving…
Correct Method 1 If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the…
To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it. Install the monitor at least 200 mm away from the wall…
IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable
How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. 600 400…
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install…
You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about
Some of the cables are not provided. This monitor supports the Plug and Play* feature. * Plug and Play: a feature that enables a PC to recognize devices…
s, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the Plug and Play* feature. *…
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the…
No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the…
The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ”…