Loading manual…
Loading manual…
This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick Internet setup, while this guide contains…
This chapter introduces what the router can do and shows its appearance. It contains the following sections: • Product Overview • Panel Layout
The TP-Link router is designed to fully meet the need of Small Office/Home Office (SOHO) networks and users demanding higher networking performance. The…
1. 2. 1. Top View The router’s LEDs (view from left to right) are located on the front panel. You can check the router’s working status by following the LED…
This chapter contains the following sections: • Position Your Router • Connect to the Internet
The product should not be located in a place where it will be exposed to moisture or excessive heat. • Place the router in a location where it can be connected…
Follow the steps below to connect your router. If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable /…
This chapter introduces how to log in to the web management page of router.
This chapter presents how to configure the various features of the router. It contains the following sections: • Status • Network • Wireless • Guest Network •…
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Status. You can view the current status information…
4. 2. 1. WAN 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Network > WAN. 3. Configure the IP…
4. 3. 1. Wireless Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless > Basic Settings.
Guest Network allows you to provide Wi-Fi access for guests without disclosing your host network. When you have guests in your house, apartment, or workplace…
Chapter 4 Configure the Router 3. Enable the Guset Network function. 4. Create a network name for your guest network. 5. Configure the Security type. • To…
Chapter 4 Configure the Router • Default Domain (Optional) - Input the domain name of your network. • DNS Server (Optional) - Input the DNS IP address provided…
This function allows you to protect your home network from cyber attacks and unauthorized users by implementing these network security functions. 4. 7. 1.…
Chapter 4 Configure the Router MAC addresses can use the password to browse the built-in web pages to perform administrator tasks. 3 ) Click Add, and your PC’s…
Chapter 4 Configure the Router 4. 8. Parental Controls Parental Controls allows you to block inappropriate and malicious websites, and control access to…
Chapter 4 Configure the Router 3 ) Click Save. 4. Go to Access Control > Schedule and configure the schedule settings: 1 ) Click Add New. 2 ) Create a unique…
Chapter 4 Configure the Router 2. Enter the following information. • Destination IP Address - The Destination Network is the address of the network or host…
Chapter 4 Configure the Router • Gateway - This is the IP address of the gateway device that allows for contact between the Router and the network or host. •…
Chapter 4 Configure the Router ¾ ¾ To add IP & MAC Binding entries: 1. Click Add New. 2. Select the Bind checkbox. 3. Enter the MAC address and IP address. 4.…
Chapter 4 Configure the Router • Logout - Click Logout to log out of the DDNS service. No-ip DDNS If the dynamic DNS Service Provider you select is…
Chapter 4 Configure the Router • PPP Username/Password - Enter the user name and password provided by your ISP. These fields are case-sensitive. •…
Chapter 4 Configure the Router It is strongly recommended that you change the default username and password of the router, for all users that try to access the…
Q1. What should I do if I forget my wireless password? The default wireless password is printed on the label of the router. If the password has been altered…