Loading manual…
Loading manual…
Safety information • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because the following operating…
Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because the following operating instructions cover…
Installing a Clean Station Approximately 0.5 m Approximately 0.5 m Status Indicator Approximately 1 m 1 Connect the provided power cord to the bottom of the…
Approximately 0.5 m Approximately 0.5 m Status Indicator Approximately 1 m 1 Connect the provided power cord to the bottom of the Clean Station. 2 Position the…
Charging the Jet Bot Before using the Jet Bot for the first time, charge it completely. (For the charging time and cleaning time, refer to the ‘Product…
Before using the Jet Bot for the first time, charge it completely. (For the charging time and cleaning time, refer to the ‘Product specification’.) 1 Open the…
Before using the Jet Bot, press the power switch at the side of the Jet Bot to turn the Jet Bot on. ❇ ❇For the normal use of the Jet Bot’s functions, the…
Jet Bot 03 02 01 06 08 05 09 04 07 Top 01 Obstacle Sensor 02 Power switch 03 LiDAR Sensor 04 Dustbin 05 Start/stop button 06 Docking (Recharging) button 07…
Cleaning the Jet Bot Before maintenance work, you should turn off the power switch at the side of the Jet Bot. Emptying and cleaning the Dustbin 1 Grasp the…
Before maintenance work, you should turn off the power switch at the side of the Jet Bot. Emptying and cleaning the Dustbin 1 Grasp the Jet Bot’s cover at the…
Before cleaning the Clean Station, unplug the power cord from the electrical outlet. Replacing the Dust Bag 1 Press the [PUSH] button on the top of the Clean…
SmartThings App The SmartThings App is only compatible with models that have a Wi-Fi function. If you do not have a Wi-Fi router, you cannot use the…
The SmartThings App is only compatible with models that have a Wi-Fi function. If you do not have a Wi-Fi router, you cannot use the SmartThings App. Setting…
The Status Indicator turns red and blinks with a voice guide. 2 Turn off the power switch and check the instructions below and take appropriate actions. 3 When…
Symptom Checklist The Jet Bot is not working at all. • Check if the power switch is on. • Check if the Status Indicator is on. • Check if the Jet Bot's battery…
The software included in this product contains open source software. To obtain the source code covered under licenses which have the obligation of publishing…
Turn the Jet Bot on and press and hold the [ ] + [ ] for 7 seconds. Then the status indicator turns white and blinks, and the Jet Bot starts factory default…
Classification Items VR30T85**** series Mechanical specifications Weight 3.4 kg Size W 350 mm x D 350 mm x H 99.8 mm Cleaning method LiDAR location recognition…